I Recently replaced the backlight inverter capacitors in my free Vizio GV42L FHDTV10A with these NTE capacitors from radio shack:
http://www.radioshack.com/nte-nev680.../55047309.html
Backlight was strobing like crazy. After soldering in the new capacitors, everything seemed great, However now around 50% of the time I notice that the picture is flickering a bit. I can't tell if it's the backlight or not.
Could this be because of the caps I chose? Or because of my poor soldering ability?
Should I replace the caps with low ESR caps? I don't know much about capacitors in general, a friend just told me the NTE ones would work just fine.
By the way, the TV is an early 2008 model for what it's worth.
Thanks.
http://www.radioshack.com/nte-nev680.../55047309.html
Backlight was strobing like crazy. After soldering in the new capacitors, everything seemed great, However now around 50% of the time I notice that the picture is flickering a bit. I can't tell if it's the backlight or not.
Could this be because of the caps I chose? Or because of my poor soldering ability?
Should I replace the caps with low ESR caps? I don't know much about capacitors in general, a friend just told me the NTE ones would work just fine.
By the way, the TV is an early 2008 model for what it's worth.
Thanks.
Comment