Saw a cap vent today

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mmartell
    Badcaps Legend
    • Oct 2013
    • 3189
    • Canada

    #1

    Saw a cap vent today

    Had the back removed from an Olevia lcd today which is going black after a few seconds and whoa, as I was looking around to the front of the set a steam trail caught my eye. Spewed a good four feet or so just like a steam whistle without the whistle lol. Actually, can't remember if there was any sound involved ? Pretty cool though.

    Cap was a 1000uf 35v in the audio section of the mainboard. Have yet to replace it.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Saw a cap vent today

    I had a 450V capacitor vent on me due to a failed PFC circuit dumping 600V+ into it. That was impressive, and the room stank for the rest of the day.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain

      #3
      Re: Saw a cap vent today

      I recapped a vrm on an asus motherboard that had the capacitor polarity markings backwards (they had the stripe as positive and empty as negative, were as normally its the other way around) and because I wasnt observant enough I installed the capacitors the "conventional" way and as soon as I fired the motherboard on my test bench a heard a slight hissing and a small amount of steam so I instantly shut of the board and realised my mistake and the fact that ive killed 3 nice rubycons and now have to spend more time on this peice of junk. WHY ASUS ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: Saw a cap vent today

        That was when I was 13 yo and only knew the normal markings of capacitors.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • electricboyo
          Member
          • Mar 2013
          • 26
          • USA

          #5
          Re: Saw a cap vent today

          After 40+ years of electronics work, I still must confess to occasionally mounting an electrolytic capacitor with reversed polarity! Doing this certainly does cause them to vent!

          -EB

          Comment

          • Shinju
            Badcaps Legend
            • Mar 2014
            • 1239
            • USA

            #6
            Re: Saw a cap vent today

            Also makes you jump when they pop! Only done that once on a Rail cap on a car amp!

            BOOM, shredded paper everywhere!

            Comment

            • electricboyo
              Member
              • Mar 2013
              • 26
              • USA

              #7
              Re: Saw a cap vent today

              Electrolytics aren't the only type that can pop.

              I restore antique radios. Old radios contain axial "paper and foil" capacitors. Typically these are in molded black plastic tubes with colored marking bands ("bumblebee" caps) or are in cardboard tubes covered with wax. After 50 or 60 years, the paper dielectric breaks down and these capacitors become leaky. They act as if there is a resistor in parallel with the capacitance.

              One capacitor, usually 0.01uF or 0.05uF is connected directly across the incoming 120V AC power. This is called the "line cap." Often this cap is powered even when the radio's power switch is off.

              One time, while I was hunched over the radio chassis positioning my test probes, a line cap exploded loudly, blowing shreds of paper and foil all over my face. Good thing I was wearing glasses! After that I always change these line caps before powering up old radios. When such a capacitor becomes leaky AND has 120V AC applied to it, it can get very hot very fast!

              Today, there are "safety rated" line caps (type X1) that are guaranteed "not to pop!"

              -EB

              Comment

              • goontron
                5000!
                • Dec 2011
                • 4108
                • US

                #8
                Re: Saw a cap vent today

                Originally posted by electricboyo
                Electrolytics aren't the only type that can pop.

                I restore antique radios. Old radios contain axial "paper and foil" capacitors. Typically these are in molded black plastic tubes with colored marking bands ("bumblebee" caps) or are in cardboard tubes covered with wax. After 50 or 60 years, the paper dielectric breaks down and these capacitors become leaky. They act as if there is a resistor in parallel with the capacitance.

                One capacitor, usually 0.01uF or 0.05uF is connected directly across the incoming 120V AC power. This is called the "line cap." Often this cap is powered even when the radio's power switch is off.

                One time, while I was hunched over the radio chassis positioning my test probes, a line cap exploded loudly, blowing shreds of paper and foil all over my face. Good thing I was wearing glasses! After that I always change these line caps before powering up old radios. When such a capacitor becomes leaky AND has 120V AC applied to it, it can get very hot very fast!

                Today, there are "safety rated" line caps (type X1) that are guaranteed "not to pop!"

                -EB
                HA! you should see a black beauty cap pop, that will embed into your skin, or the wood cabinet, or chip the bakelite
                Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

                "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

                Excuse me while i do something dangerous


                You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

                Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

                Follow the white rabbit.

                Comment

                • electricboyo
                  Member
                  • Mar 2013
                  • 26
                  • USA

                  #9
                  Re: Saw a cap vent today

                  Black Beauty caps.

                  Guitar players will pay an arm and a leg for these things. They use them inside the guitar body as a tone control cap. I guess that's OK since there's no DC voltage and the AC voltage is only millivolts!

                  So should we all start selling the old Black Beauty and "bumblebee" caps on ebay that we take out when we are recapping? I've probably thrown away a couple hundred of them! Silly me!

                  EB

                  Comment

                  Related Topics

                  Collapse

                  • Document Archive
                    ALIENWARE Steam R2 i7-6700T Specification for Upgrade or Repair
                    by Document Archive
                    This specification for the ALIENWARE Steam R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam R2 boardview and Steam R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for ALIENWARE Steam...
                    09-12-2024, 03:28 PM
                  • Document Archive
                    ALIENWARE Steam Machine R2 i7-6700T Specification for Upgrade or Repair
                    by Document Archive
                    This specification for the ALIENWARE Steam Machine R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam Machine R2 boardview and Steam Machine R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                    09-12-2024, 03:28 PM
                  • JayPoorJay
                    Steam Generator - To Be or Not To Be - And 1000 Other Questions
                    by JayPoorJay
                    Good Morning All.

                    Now I've gone and done it! Wife and I bought a big old "new" 100yo colonial house and a guy can dream, right??? I'm building a sauna and a steam shower in the basement.

                    At this point, because of y'all, I've fixed a couple TVs, replaced a few capacitors and resistors, repaired some E ribbons, ALL with y'all's help and reading here. Next challenge,,,, I am still and perhaps will ALWAYS be at bottom of a steep learning curve with electronics... Anywho,,,

                    These things (Thermosol Steam Suite ASD450) NEW are in the thousands. That plus...
                    11-26-2024, 06:18 AM
                  • corrize
                    Voice recorder for blind persons Milestone 311 - Whistle in the speaker
                    by corrize
                    Hello, I have 2 voice recorder to repair. Same issue : whistle in the speaker, but the sound is good with the headphones (via jack audio plug).
                    Built in year 2000, I guess that could be the (yellows) capacitors ? What do you thing about that please ?

                    (I found the specs : tantalum-polymer capacitors 100uF 10v 10%.)
                    ...
                    09-14-2025, 02:46 PM
                  • Jim Farid
                    Steam Deck: how to solder 3 pin POWER BUTTON with one missing (ripped-off) solder pad?
                    by Jim Farid



                    The middle pad (B) on my steam deck's power button got ripped off. I want to bridge the middle pin to a via or another pad but don't know which one. Do you guys know any?

                    The pads with the stars are all ground.

                    In case there's no pad I can bridge to, do you know how to turn my deck on without using the power button? Thanks a lot 🙏....
                    06-09-2024, 02:38 PM
                  • Loading...
                  • No more items.
                  Working...