Re: Panasonic TC-P46S1
The two boards.
The two boards.
Attached Files
-
-
Re: Panasonic TC-P46S1
looks like it's closer than we think although I'd expect some difference but would take a lot of work comparing the parts list for each which would take hours, I don't feel like digging on but it's surprising that both the inductors and caps in that section at least are the same part #. In the 2010 models they definitely vary in that part.
just an example of where i looked which i expected some difference although they have positioned those inductors differently but I don't know if that matters
50s1
L16402 G0C1R1KA0206 PEAKING COIL 1
L16403 G0C1R1KA0206 PEAKING COIL 1
L16406 G0C1R1KA0206 PEAKING COIL 1
L16412 G0C1R1KA0206 PEAKING COIL 1
L16413 G0C1R1KA0206 PEAKING COIL 1
L16414 G0C1R1KA0206 PEAKING COIL 1
L16472 G0ZZ00002183 PEAKING COIL 1
L16697 G0C102KA0187 PEAKING COIL 1
L16698 G0C681MA0065 PEAKING COIL 1
L16699 G0C471KA0167 PEAKING COIL 1
L16851 G0ZZ00002183 PEAKING COIL
C16631 F0C2E405A232 E 0.040UF, 250V 1
C16632 F0C2E405A232 E 0.040UF, 250V 1
C16633 F0C2E405A232 E 0.040UF, 250V
46s1
L16401 G0C1R1KA0206 PEAKING COIL 1
L16402 G0C1R1KA0206 PEAKING COIL 1
L16403 G0C1R1KA0206 PEAKING COIL 1
L16411 G0C1R1KA0206 PEAKING COIL 1
L16412 G0C1R1KA0206 PEAKING COIL 1
L16413 G0C1R1KA0206 PEAKING COIL 1
L16472 G0ZZ00002183 PEAKING COIL 1
L16697 G0C102KA0187 PEAKING COIL 1
L16698 G0C681MA0065 PEAKING COIL 1
L16699 G0C471KA0167 PEAKING COIL 1
L16851 G0ZZ00002183 PEAKING COIL
C16631 F0C2E405A230 E 0.040UF, 250V 1
C16632 F0C2E405A230 E 0.040UF, 250V 1
C16633 F0C2E405A230 E 0.040UF, 250VComment
-
Re: Panasonic TC-P46S1
there you go that's one but what's interesting is grab the manuals and neither have a polyester in the list of parts and the 46 it shows 300uf for the missing electrolytic
ayway probably worrying about nothing but not much work to swap parts thereComment
-
Re: Panasonic TC-P46S1
Day 3 Its still working with a beautiful picture. How long should I test it until its ready for sale ?Comment
-
I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.
So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
After doing a factory reset this problem was gone and the picture was back to...01-06-2025, 06:02 AM -
Hi everyone,
I'm new here and trying to repair my Panasonic TX-P50V10E plasma TV, which is currently showing the 6 red blink error code.
Just for context: I'm used to building PCs and installing modchips in old consoles, but this is my first time trying to fix a TV. I'm French, and while my English is okay, I'm using ChatGPT to help translate and clarify my messages as much as possible — so please forgive any odd phrasing.
I'm also not very experienced with using a multimeter, but I'm very motivated and ready to follow instructions carefully and report... -
Years ago my tv gave a 7 blink code which turned into 8 during diagnosis. I had ordered a replacement ss board but somehow the tv started working again and i never used the board. Now a week ago my tv flickered and shut off at random and gave the 8 blink error code. The same issue it had all those years ago. The only difference this time is that over the last few months there has been some purple and green tinge that comes and goes in more solid colors such as white.
Anyway i checked all the screws and replaced the ss board with a known good one and still got 8 blinks. I saw a... -
Greetings from SoCal
I am new to this forum but not new to forum world. I come from Automotive end of side which is my main passion in life. Give the automotive nature, I love fixing and restoring things and I have in the past fixed many simple electronics, soldering, etc.. but this is a bit more involved so I found this forum, and I am very glad I did.
I picked up a Panasonic TC-P60VT60 with the 7 BLINK error.
Upon removing the back plate I found spider webs, dead spiders, and an amazing amount of dust. I did my best to clean the surface of the boards with a portable vacuum... -
I aquired this Panasonic 60" plasma around the time my first child was born. It was meant to be a project tv, hoping to fix it chipping away at the repair in my free time. Well that was 2 years ago and i'm really just getting around to making a sincere effort to see if I can ressurect this beast.
The symptoms of the tv ar as follows:- Plug AC in to back of TV
- After about 2 seconds the relay on the P-sub board will click on and then a fraction of a second later it clicks back off
- The 3 blink code is given by the power LED
- If the TV is unplugged and then
Comment