Re: Badcaps - what do you think - un46b6000vf samsung
C series= bad main board
D series= bad panel
C series= bad main board
D series= bad panel
-
-
Re: Badcaps - what do you think - un46b6000vf samsung
What series is this one?Comment
-
Re: Badcaps - what do you think - un46b6000vf samsung
BComment
-
Re: Badcaps - what do you think - un46b6000vf samsung
Oh duh hahahaComment
-
Re: Badcaps - what do you think - un46b6000vf samsung
A series = Bad capacitors/Bad main board/Bad panel
B series = Bad panel/bad main board
ES series = Bad panel/bad main board
F series = Bad panel
Samsung panels die like flies... I am not sure why.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Badcaps - what do you think - un46b6000vf samsung
Agree with Tom and that specific B series looks like a bad panel im afraid... can never be 100% though... I personally would pay up to $50 for that TV without breaking a sweat... If panel is toast, the main board is worth more than that, and if the main board / Tcon is toast, then the panel is worth more
Good luck,
DemonComment
-
Re: Badcaps - what do you think - un46b6000vf samsung
Sorry, I thought that it's a D series.
I would not invest in these TV's board, most likely most of them have panel issues.Comment
-
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
- Prior owner tried a replacement main board. No difference.
- Samsung 2x red blinking standby LED = panel fault
- Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
- Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
- Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
-
Hi, need bios for Samsung Galaxy Book NP750XED-KC4ES.
This board mounts a intel alder lake, and seems that the bios is corrupted.
I tried two versions of flash image tool 16, and shows some errors and can't open it.
This are the errors:
Command Line: X:\MEA\FIT 16.0.15.1531\fit.exe
INFO : Start decompose 'X:/MEA/samsung.bin' image.
INFO : MFIT version used to build the image: 16.0.15.1554
INFO : Generate layout dictionary <xpath, container wrapper>
INFO : Layout dictionary generated successfully
ERROR...
Comment