Polaroid txl 04244B

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rolowry
    New Member
    • Sep 2014
    • 2
    • usa

    #1

    Polaroid txl 04244B

    Can anyone tell me if the backlight ccfls are replaceable with others, new or used from other makes and models of tv's. finding parts lists are impossible. I have found ccfls in the proper length and diameter. Just don't know if they're interchangeable.

    thanks in advance

    Roger
  • Clydeuk
    Senior Member
    • Jan 2012
    • 193

    #2
    Re: Polaroid txl 04244B

    as long as the length is about right (certainly no longer than originals) they should be fine. you won't find this in a parts list as the manufacturer considers the entire assembly a replaceable unit. Larger screens (26 inch and above) tend to be east to take apart to get access to the ccfl's, be careful with the tabs at the top and sides as they are easily damaged and try to keep dust out if you can.

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #3
      Re: Polaroid txl 04244B

      Also make sure the lamps in your panel are CCFL not EEFL. You can look up the spec sheet of the LCD panel to find out.
      Attached Files
      Last edited by budm; 09-05-2014, 09:40 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      Related Topics

      Collapse

      • Chrissygizmo
        Polaroid p49fn0038k backlights flashing split second
        by Chrissygizmo
        Hi all, I have a polaroid p49fn0038k, I originally thought the problem was just a straight forward backlight replacement, however this isn't the case..

        When I power it up, the backlights flash on for a split second, I've tested the backlight strips and all are fine, I can see the polaroid symbol on the screen using a torch light....

        Any help would be greatly appreciated

        Thanks in advance
        11-10-2022, 10:30 AM
      • crazycavan
        polaroid TQLHD24PR004 no power
        by crazycavan
        polaroid TQLHD24PR004 no power
        hi, my tv no longer starts like dead, no standby led

        motherboard : MS36639-ZC01-01
        panel : V236BJ1-P01
        flash spi: GD25Q64
        need usb firmware or to reprogram​
        05-05-2024, 08:40 AM
      • snimmits
        Polaroid P43D300 (vestel 17MB97) issues (bluetooth & various sw bugs)
        by snimmits
        Good afternoon,

        I have a Polaroid P43D300.
        It shipped with WiFi and Bluetooth.

        Two weeks ago, I ran through the first time installation.
        This did a full reset and went through the first time setup.

        Once complete, I went to settings > sound.
        selected Audio Link, changed setting from disabled to enabled, pressed green button on remote and the tv does a search (discovery) for Bluetooth devices.

        search completes and doesn't find any devices.

        I have tried everything I can think of.

        Can someone provide...
        03-01-2024, 09:26 AM
      • maamar-tdj
        Polaroid TV TQL48R4PR003 switch off after logo display
        by maamar-tdj
        Hello,
        I am looking for the Dump Firmware of this model.
        Mark: Polaroid
        Model: TQL48R4PR003
        Main board chassis: CV9203H-A42
        LCD Screen / Panel: 15y_s48ff11mb7s4lv0.1
        More information: W25Q32

        thank you for your reply
        05-26-2022, 08:53 AM
      • coax81
        Polaroid tql39r4pr002 TV switch off after logo display
        by coax81
        Hello,
        i have an issue with my polaroid TV Model : tql39r4pr002
        the standby led is red , and when i turn on the TV it shows the polaroid logo and turns off, also the standby led switches to blue the back to red .

        capacitors are apparently ok, i have 320V in the smoothing primary capacitor, and 13V in the diodes in the secondary.

        i don't understand why the mainboard switches to this mode and don't turn on.

        don't find any service manual for this model ,or the main board schematic. cv9203h-a42

        thank you for your help....
        08-12-2020, 08:43 PM
      • Loading...
      • No more items.
      Working...