Hello,a Wharfdale LCD2710HDAF. It had no power originally and after removing the back i discovered 5 bloated caps (circled in red).
I replaced those and all of the other big caps (circled in yellow).
The blue standby LED now comes on when i press the power button, however it takes 2 or 3 presses on the power button on the right before the tv powers on, and when it does there is a high pitched whine that seems to be coming from the inverter board on the left.
I did manage to pull a trace off the board but i think i soldered it into the correct position, maybe i haven't or is there something else i have missed and should be checking ?
thanks.
I replaced those and all of the other big caps (circled in yellow).
The blue standby LED now comes on when i press the power button, however it takes 2 or 3 presses on the power button on the right before the tv powers on, and when it does there is a high pitched whine that seems to be coming from the inverter board on the left.
I did manage to pull a trace off the board but i think i soldered it into the correct position, maybe i haven't or is there something else i have missed and should be checking ?
thanks.
Attached Files
But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. 
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
Comment