I have a 32 inch TV Vizio VA320M turns on to logo screen and won't change.
Soft boot did not work
Any idea would be appreciated
Thank's.
Soft boot did not work
Any idea would be appreciated
Thank's.
Attached Files
-
-
Re: Vizio VA320M stuck on logo screen
Based on Vizio's main board reputation and this particular fault, the main is most certainly the problem. You may get by with simply replacing the eeprom on it, but in my experience that's about a 50/50 shot. Shopjimmy and other places offer pre-programmed eeproms if you are comfortable with trying to change it. If you do buy a replacement main be sure to match all of the numbers on it. Most of these Vizio TVs can contain several different board versions. -
Re: Vizio VA320M stuck on logo screen
Thank's
.Can you tell me which one is the eeprom ?
I see a U407 and U513 and some others chips...Comment
-
Re: Vizio VA320M stuck on logo screen
I am having the same problem with my VA370M. Another thread suggested U409. Since you last posted in August did you get it working or di you buy another TV?Comment
-
I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.
The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While... -
The TV stuck at logo and cannot be turned off unless the cord is unplugged.
I was given two main boards and exactly the the same thing happens to both of them.
I have checked all voltages on the connector on the power board that goes into the main board and they all look OK.
There are no signs of damage on any of the 3 boards.
Would someone help me with a pointer to the manual? It's supposedly to be the same as E601i-A3.
Thanks! -
Having this very weird issue.
The owner of this laptop complained about screen being intermittent when opening and closing, and has been using the laptop on a thunderbolt video connection since the screen failed.
I swapped with a working screen from an A2141 waiting for parts.
The Os exhibits this weird behavior where it boots to to 1/3 the status bar, then it makes the boop sound. It's at the log in but for whatever reason the desktop isn't loaded.
The laptop boots fine into recovery mode. I updated from Monterey to Sonoma and the laptop still has... -
Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".
It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...07-31-2025, 08:37 PM -
Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.
It does power up when pressing the power button.
I already try the power button while plugin the plug with no result.
Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.
Could this be an PSU or eMMC issue ?
Comment