Sharp Aquos LC60C52U blink codes
I put a new T-CON board in this TV because the screen was green and it had a terrible picture, now when I power it up I hear the relay click then I get the following blink code: Power & OPC 1-2, then OPC 1-2-3, then it repeats, any suggestions?
-
-
Re: Sharp Aquos LC60C52U blink codes
Is the new one a new one or a pull
Is it EXACTLY the same numbers on the part/barcode label.
Try the old one back in see if it works as it did?Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: Sharp Aquos LC60C52U blink codes
Good call, it was a pull purchased on eBay. I will try that tonight. Stay tuned, same bat time, same bat channel
Last edited by zukdj; 08-01-2014, 07:57 AM.Comment
-
Re: Sharp Aquos LC60C52U blink codes
Does anyone know what the code means off hand, is there a specific sequence to try a TV reset?Comment
-
Re: Sharp Aquos LC60C52U blink codes
I got the scree to come up with the old TCON and there are dots randomly all over the screen...hmmm?Comment
-
Re: Sharp Aquos LC60C52U blink codes
Looks like it may be a main board, any idea where I can find one reasonably priced?Comment
-
Hello, looking for a list of error codes for this TV. made in 2020, its manufactured by Hisense under Sharp brand. No clicks, black screen, no sound, power light is on solid. When I press power, it blinks 5 normal blinks and 1 short. and nothing happens.
Anybody has a list of error codes that might apply to this TV? I have not opened it yet.
Regards,... -
I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display... -
I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp... -
Hello!
I'm a few days old into this TV screens repair universe so please bear with me.
Recently, and all of a sudden my 40ā 4K Sharp Aquos LCD TV turned on with colors all smudged in some places on the screen that remain like that even without any kind of video source. I do have image but the colors are smudged/tinted/ washed out in patches as per defects. This to me looks similar to burn in but Iām shore this is not an OLED.
- I did the classic unplug and hold power button to discharge the caps but it didn't help.
- I did a factory reset as well... -
Hi community,
I will describe my problem with a TV in those short following terms to be the most precise :
What i have :
Sharp Aquos LC-60LE635E
power board DPS-162KP-1
main logic board QPWBXF733WJN2
symptoms :
white led light logo at startup,
after 2 minutes, blinking 3 times a row, repeating
no backlight (and apparently no picture, checked panel with flashlight)
no startup sound
powerboard investigations :
1-2 PNL : 0v
3-4 GND
5-6-7-8 UR : 13.15v
9-10-11-12...
Comment