Sharp Aquos LC60C52U blink codes
I put a new T-CON board in this TV because the screen was green and it had a terrible picture, now when I power it up I hear the relay click then I get the following blink code: Power & OPC 1-2, then OPC 1-2-3, then it repeats, any suggestions?
-
-
Re: Sharp Aquos LC60C52U blink codes
Is the new one a new one or a pull
Is it EXACTLY the same numbers on the part/barcode label.
Try the old one back in see if it works as it did?Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: Sharp Aquos LC60C52U blink codes
Good call, it was a pull purchased on eBay. I will try that tonight. Stay tuned, same bat time, same bat channel
Last edited by zukdj; 08-01-2014, 07:57 AM.Comment
-
Re: Sharp Aquos LC60C52U blink codes
Does anyone know what the code means off hand, is there a specific sequence to try a TV reset?Comment
-
Re: Sharp Aquos LC60C52U blink codes
I got the scree to come up with the old TCON and there are dots randomly all over the screen...hmmm?Comment
-
Re: Sharp Aquos LC60C52U blink codes
Looks like it may be a main board, any idea where I can find one reasonably priced?Comment
Comment