hi guys sorry i cant find the swop thread so posted here but would anyone have one of these to swap or sell ?
thanks
thanks
-
Well, due to my grid tie inverter not accepting high voltages, and the fact that the lions in my solar panels are 36V (72-cell) I think I need to stick with 72-cell.
However I have a few smaller panels that are 36, 32, and two 30-cell. The 36 and 32 together run at 75% efficiency (and subtract more with additional inefficiencies) when running in parallel with the 72-cell panels. The kicker is that the two 30s... generate 0% power when connected in parallel(!)
So now what to do with these small panels?
I could sell them...
Or I could shim them.... -
Hey!
i have a quik question:
im having a iphone 14 pro. trying to make a CPU swap but i just have a EU Donnor Board (With sim card) and the original board is USA Board (E-SIM) . is there any problem with the baseband activation bettewen them?
i already made the swap but not getting IMEI (BASEBAND) and unfortunately don't have iSocket to test it first. Thanks10-16-2024, 11:41 AM -
I'm reaching out to see if anyone has done a Wifi UL000 swop from the same donnor board on an M1 A2338 Macbook Pro or if it is possible to do.
If it is possible what needs to be replaced as i cannot find the rom chips to go with it as mentioned on this page:
https://logi.wiki/index.php/T2_MacBo...IC_Replacement
Thanks -
I have this smart-tv that had a MB swap.
Now The tv is ok but the wifi does not turn on.
Is these wifi modules bound to their mb?
Could i bga swap memory module from original mb? (maybe?) -
Would I be able to swap a 0.27 Ohm Kx2 5W resistor for a 0.22 Ohm Jx2 5W resistor in a Harman/Kardon AVR? Cement type.