Hi, [USER="295753"]mon2[/USER] . thanks for taking the time to answer me. I was just trying the macbook with the jump wired and at the moment that i remove the jump wired for tested without it. Now the macbook turns on normally.
im testing the macbook for now.​mon2Hi, [USER="295753"]mon2[/USER]...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Macbook A1278 (820-2936) No power. missing SMC_BC_ACOK
Hey! This is a A1278 macbook 2011.
Problem: Not turning on / No green light
Im using by3200s charger.
Voltajes:
PPBUS_G3H = 12.26v
SMC_RESET_L = 3.3v
PP3V42_G3H = 3.42v
U7000 =
Pin 1 CHGR_AGATE = 0v
Pin 2 CHRG_DCIN = 19v
Pin 3 CHRG_ACIN = 4.6v
Pin 10 SMBUS_SMC_BSA_SDA = 3.3V
Pin 11 SMBUS_SMC_BSA_SCL = 3.3V
Pin 12 PP3V42_G3H = 3.42v
Pin 13 CHRG_RST_L = 3.3V
Pin 14 SMC_BC_ACOK = 0.8V
Pin 19 PP5V1_CHRG_VDD = 5.05V
Pin 20 PP5V1_CHRG_VDDP = 5.03V...
-
Thank you guys [USER="302067"]reformatt[/USER], [USER="169897"]piernov[/USER] and [USER="295753"]mon2[/USER] for the help. in fact, the track of the Resistor R5010 (SMC_XTAL) to SMC was missing​. Jump wired and for now, everything is working normal. Thanks again!reformattThank you guys...
Leave a comment:
-
yes, it does the switch between LOW and HIGH logic levels.
I changed the SMC again and it does the same behavior.Last edited by Adogabriel100; 12-30-2023, 11:39 AM.
Leave a comment:
-
Of course i thought the same thing, i replace the SMC and it still show the same behavior.
in that post that you re put in as reference. The guy says that he replace the SMC twice and after that the mac has the same behavior. in fact, he take off the SMC and put on another MB and it work normally.
I'm going to look for another SMC and try it again. I'll change it and then I'll tell you how it went....
Leave a comment:
-
Macbook pro A1278 doesn't turn ON 820-3115-B
Hi! this is a Macbook pro A1278 MB: 820-3115-B. It came to me from another store with an attend to repair. Now im trying myself to repair this one.
It doesn't turn on and there is no green/orange light either.
Im using mac power cable by-3200.
those are the actual voltajes values and missing lines:
im stuck here with this one here. dont know where to look now. im thinking about SMC (i already change it, dont know if it is ok)
thanks for the help!
PPBUS_G3H = 12.26V
PPBUS_S5_HS_OTHER_ISNS = 12.26V
PP3V42_G3H = 3.47V...Last edited by Adogabriel100; 12-29-2023, 04:19 PM.
-
Re: Macbook A1706 Battery Service Issue
are you trying a new or used battery?
How many charge cycles on the battery ?Last edited by Adogabriel100; 08-17-2023, 12:25 PM.
Leave a comment:
-
Help identifying a component/circuit
Hi. this is my father tensiometer. it that drives 6v and someone put a 12v charger on it.
i have a problem identifying this componet and circuit:
really apreciate if you guys could help me with this one, thanks in advante
[ATTACH]308556[/ATTACH]
[ATTACH]308557[/ATTACH]Hi. this is my father tensiometer. it that drives 6v and someone put a 12v charger on it.
i have a problem identifying this componet and circuit:
really apreciate if you guys could help me with this one, thanks in advante
[ATTACH]308556[/ATTACH]
...
-
Re: Macbook A1278 no charge
Voltaje of pin 10, 11 and 13? of U7000
Leave a comment:
-
Re: Macbook A1278 no charge
PP3V42_G3H voltaje?
voltaje on pin 14 of U7000?
voltaje of SMC_RESET_L?
Leave a comment:
-
Re: Macbook pro A1278 820-2936 No light/turn on
SMC_BC_ACOK = 400 Kohms
R7010 pin 1(PPDCIN_G3H) = 19.98 / PIN 2 (CHGR_ACIN) = 4.73v
R5087 = 415k ohms (measurement before taking it out of board)
R5087 pin 1(SMC_BC_ACOK)= 3.07v / pin 2(PP3V42_G3H)= 3.44v. (measurement after put another resistance)
OKAY. now... this happens; I take out R5087 from the board to measure the resistance. next thing. it blow from my tweezers. i put another one and the macbook it's turning on without any problem again (at least for now).
im...Last edited by Adogabriel100; 06-30-2023, 05:50 PM.
Leave a comment:
-
Re: Asus ROG N501JW no display
try some thing simple firts: find the CMOS battery and remove for arround 10seconds. after that put it back and see if anithing change.
if your laptop keep doing the same behavior them is time to take out the board and do an visual inspection to see if there is anithing visible, like corrosion.
Do you have the history of this laptop? how it ended like that
Leave a comment:
-
Re: Macbook pro A1278 820-2936 No light/turn on
SMC_BC_ACOK = 0.69
some times the macbook turn on (im using BY-3200) and when i disconect the cable just dont turn on again.
i already change the U7000 and the SMC (before ask for help) and got the same behavior.
the u7000 from a know working board (yes, just for test) and the SMC from a donnor board.Last edited by Adogabriel100; 06-30-2023, 04:55 PM.
Leave a comment:
-
Re: Asus ROG N501JW no display
Ok. Try to press the caps lock to see if the caps lock turn on. (want to see if have any response)
when you say that you hold power button and goes off. it turn on again automatically?
Leave a comment:
No activity results to display
Show More
Leave a comment: