Hey all!
I probably know the answer to this but I am going to ask anyway.
I got this in a bundle lot of panels and when you turn the unit on it comes on the LED lights up and the screen is illuminated, I have audio on all inputs.
NOW for the problem, when I unplug the left LVDS cable to the panel the left side goes white and the right side displays a picture.
Now if I plug back in the left LVDS and unplug the right LVDS nothing changes in fact the right side doesn't even go white it stay's blank (all this time audio is present)
So this could be one of 3 things and I am pretty sure its a bad panel, but could it be a bad mainboard or possible bad LVDS cable?
I was able to get enough gap between the panel shield and a plastic barrier that hides the bottom tab bonds that I could see and I ran a toothpick over them and nothing changed.



I probably know the answer to this but I am going to ask anyway.
I got this in a bundle lot of panels and when you turn the unit on it comes on the LED lights up and the screen is illuminated, I have audio on all inputs.
NOW for the problem, when I unplug the left LVDS cable to the panel the left side goes white and the right side displays a picture.
Now if I plug back in the left LVDS and unplug the right LVDS nothing changes in fact the right side doesn't even go white it stay's blank (all this time audio is present)
So this could be one of 3 things and I am pretty sure its a bad panel, but could it be a bad mainboard or possible bad LVDS cable?
I was able to get enough gap between the panel shield and a plastic barrier that hides the bottom tab bonds that I could see and I ran a toothpick over them and nothing changed.




Comment