Announcement

Collapse
No announcement yet.

LG 60PZ550 color issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LG 60PZ550 color issue

    Hi there...hoping someone can help with the color issue im having on my 3 year old LG 60PZ550 plasma. Not sure if this is what is referred to as posterization or not. The problem primarily occurs on the top third and bottom third of the TV.

    So far i have tried to reset the picture, no help. Ive checked the voltage settings on the power board and they were reading correctly based on the sticker. Ive also replaced the YSus board as well as both Y buffer boards and i still have the issue.

    Following are some short videos i took of the issue: apologize for the reflection of the window in all
    TV color issue 1: http://youtu.be/oHjvCfnMYiE
    TV color issue 2: http://youtu.be/3Z_W6bZtXyg
    TV color issue 3: http://youtu.be/fAIXl98HZwA

    Thanks in advance for any assistance!
    Last edited by bgbarracus; 06-09-2014, 08:17 PM. Reason: adding plasma

    #2
    Re: LG 60PZ550 color issue

    Could this be a zsus board issue because now there is a humming noise coming from the zsus board and the picture now has a layer of black splotches that slowly go away as it warms up. Would hate to replace that board as well but still be stuck with the original problem.

    Comment


      #3
      Re: LG 60PZ550 color issue

      Think I would be more concerned with the two lines and strange image between them....

      Prob mainboard fault if all the voltages are correct.
      TELEFIX

      How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
      http://www.irf.com/technical-info/appnotes/an-1088.pdf
      PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

      Comment


        #4
        Re: LG 60PZ550 color issue

        https://www.badcaps.net/forum/showth...hlight=60pz550
        Common fault cold solder joints.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Working...