sharp lc-49cug8052k

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk
    #1

    sharp lc-49cug8052k

    Hi guys anyone have a link for the latest software update for sharp lc-49cug8052k i have tried updating it in the tv menu says upto date but its from 2018 issue apps etc freeze and apps slow to respond freeview and same apps played through firestick/hdmi playback all work ok

    Edit have now done a factory reset tv still doing the same thing on apps the app freezes then after a while tv reboots and goes back too normal freeview tv channel. so guess it is a mainboard fault as davi.p suggested.
    Last edited by vinceroger69; 10-16-2024, 06:44 AM.
    Tags: None
    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4316
      • Italy - Milan
      #2
      I strongly doubt is a software issue, bad BGA balls on RAM chips is most probably, for me..

        Comment

        • vinceroger69
          Badcaps Legend
          • Mar 2012
          • 6714
          • uk
          #3
          Originally posted by Davi.p
          I strongly doubt is a software issue, bad BGA balls on RAM chips is most probably, for me..
          The tv works fine when watching freeview tv so i will probably advise them to just use a firestick or streaming box via hdmi for the apps

            Comment

            • Davi.p
              Hobbist Tech
              • Sep 2009
              • 4316
              • Italy - Milan
              #4
              ok, freeview needs almost no ram, all decoding is hardware based, same for HDMI playback..

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk
                  #5
                  Originally posted by Davi.p
                  ok, freeview needs almost no ram, all decoding is hardware based, same for HDMI playback..
                  Thanks davi.p makes perfect sense

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • advant
                      Driving a Sharp TCON/panel with a universal main board
                      by advant
                      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                      02-03-2020, 12:25 AM
                    • sefoster
                      Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                      by sefoster
                      I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                      11-20-2022, 09:29 AM
                    • gavenb
                      Sharp LC-80LE661U 80 inch
                      by gavenb
                      Hi folks!
                      I have a LC-80LE661U that had some interesting issues.
                      Initially, it would come on and show the sharp logo and would show normal static before shutting off.

                      I started troubleshooting by disconnecting the led lighting strips and turning it on. It would do the same thing - come on, show the sharp logo and shut off. After reading, it was suggested to replace the main board. That was replaced and the same symptoms resulted. After this and some reading, the parts cannon got loaded up. I replaced the power board, same issue. Replaced the Tcon board and now it...
                      11-12-2023, 02:05 PM
                    • SONY_E-WASTER
                      Help! Sharp LC-70UE30U 3 long flashes + 3 short flashes.
                      by SONY_E-WASTER
                      Hello, I'm new to this forum. I like to tinker with Sony electronics, I have been lucky trouble shooting sony stuff, But I can't find much info on this Sharp TV.

                      The problem; plug to power>white led power indicator light is on>it turns on to the red Sharp logo>
                      then the android logo is displayed, lit fine then the android logo brightness varies, then lit normal, then the tv restarts and does the same startup logos over and over for 5 times then it turns off and the power indicator light flashes the trouble code 3 long blinks plus 3 short blinks .

                      does...
                      12-26-2021, 05:46 PM
                    • Superbee_dad
                      Sharp 80” long short flash backlight error - Help
                      by Superbee_dad
                      Hello Sharp TV experts
                      Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

                      > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
                      > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
                      01-24-2025, 11:51 PM
                    • Loading...
                    • No more items.
                    Working...