Sharp LC-80LE661U 80 inch

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gavenb
    New Member
    • Nov 2023
    • 2
    • United States

    #1

    Sharp LC-80LE661U 80 inch

    Hi folks!
    I have a LC-80LE661U that had some interesting issues.
    Initially, it would come on and show the sharp logo and would show normal static before shutting off.

    I started troubleshooting by disconnecting the led lighting strips and turning it on. It would do the same thing - come on, show the sharp logo and shut off. After reading, it was suggested to replace the main board. That was replaced and the same symptoms resulted. After this and some reading, the parts cannon got loaded up. I replaced the power board, same issue. Replaced the Tcon board and now it just powers up the back lights and shuts off without even showing the sharp logo.

    Any advice, or should I just shove this thing off a cliff?
    Last edited by SMDFlea; 11-12-2023, 04:26 PM. Reason: LC-80LE661U
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12086
    • U.S.

    #2
    Re: Sharp LC-80LE661U 80 inch

    Post clear straight on pictures of all the boards and one of the whole back as to see how everything is connected.

    Comment

    • EazyBone
      Badcaps Legend
      • Jun 2023
      • 1306
      • United states

      #3
      Re: Sharp LC-80LE661U 80 inch

      Maybe you have bad LEDs, symptom like this can happen. Your backlights are shutting off with the TV right? Or is the picture just going real dim. You have a LED tester to check them? But pictures also help us here too. I have personally had tvs turn on, backlight comes on, see logo and shuts down. The cause has been backlights, sometimes cause was main board, but you've replaced everything. So i would check there.

      Comment

      Related Topics

      Collapse

      • weelsofsteel
        toshiba 32l3753db with start up logo replaced by bob dylan
        by weelsofsteel
        hi
        recently acquired a toshiba 32l3753 smart from ebay as faulty (backlight) replaced said backlight , but on switching on instead of the normal "toshiba logo" i was greeted with a pic of bob dylan !
        as far as i know did not know you could remove a makers logo , tried to contact the seller to see if he could throw some light on the "problem" but no reply
        every thing else with the tv is as norm
        anybody any ideas ?
        01-04-2024, 08:49 AM
      • Verlengsnoer
        Bios splash/logo change
        by Verlengsnoer
        Hi all,

        at firs, i hope this is the right place to post my question.

        Im looking for a tool to change the bios logo.

        everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

        i know that HP has a build in option to change the splash logo.

        but i want to change the manufacturer logo to an own logo.

        I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
        ...
        10-28-2022, 09:52 AM
      • superdota2
        Hp 15-ef1081nr it take 1-3 mins to show hp logo
        by superdota2
        Hp 15-ef1081nr
        DA0P5MB26A0 rev A.
        Amd athlon silver
        SN# 5cd10526zy

        possible bios issue?...
        02-29-2024, 10:51 PM
      • momaka
        HannStar Hanns-G HC194d LCD monitor repair
        by momaka
        Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
        03-15-2023, 10:17 PM
      • jesterace
        lc-49cfg6021k logo loop
        by jesterace
        Hello,
        Got this TV that originally had the fault of being difficult to come on, i.e. stuck in red light standby. If it did come on, the light would go white but show no picture. Then after some time it would go back to red.

        Tested all PSU voltages. 5v, STB and 12v all present and look stable.

        Found a mainboard for 30quid so at that price it's not worth messing around. Fitted the used board which was supposedly working, and now it does show the sharp logo for about 30sec but then goes off and reboots showing the logo again.

        Would you still be...
        04-14-2021, 05:35 PM
      • Loading...
      • No more items.
      Working...