Is is possible to fix this screen ? - Grandin - UD58LGB204

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mickadoum
    New Member
    • Sep 2016
    • 6
    • france
    #1

    Is is possible to fix this screen ? - Grandin - UD58LGB204

    Issue with TV Display – Vertical Color Stripes on One Side (T-con board replaced, no improvement) - Grandin - UD58LGB204

    Hello everyone,

    I'm experiencing an issue with my TV, and I would appreciate any insights or suggestions. Here's a description of the problem:
    • The TV shows vertical multicolored stripes on the left side of the screen, covering around 30-40% of the display.
    • The right side of the screen shows the image normally, although sometimes slightly distorted depending on the content.
    • The issue persists whether I'm displaying the TV menu or any other source, so it's not related to the input signal.
    • When I disconnect one half of the screen (through the ribbon cables), the other half works perfectly with no image issues.
    • I have already replaced the T-con board, but the problem remains unchanged.
    • There are no loose connections or faulty contacts; all ribbon cables are brand new.

    It seems like the issue could be related to the LCD panel itself or something beyond the T-con board, but I’m unsure.

    If anyone has encountered something similar or has suggestions on how to fix it, I’d really appreciate your help!

    Thank you in advance!
    ​
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • KYBOSH
      Badcaps Veteran
      • Oct 2011
      • 581
      • Unknown
      #2
      Was there physical damage or trauma to the screen? Possibly somrone pressed the display near the bottom while moving it?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • kca
          LG 82UN8570AUD ~ TCON or PANEL?
          by kca
          Hello all ~

          Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

          When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

          I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
          08-31-2025, 06:38 AM
        • x_orange90_x
          TCL 50S535 bad tcon or panel issue?
          by x_orange90_x
          Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
          03-29-2025, 11:02 PM
        • Daren87
          Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
          by Daren87
          Hello everyone,

          I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
          08-13-2023, 03:25 PM
        • wizard13
          Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
          by wizard13
          Hello everyone,

          I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

          I have checked the forum and the available documentation but could not find a solution specific to my issue.
          • Brand & Model: Dynabook Satellite Pro C50D-B-100
          • Part Number (P/N): PYU13E-00C00PFR
          • Serial Number (S/N): 22028896H
          • System Configuration (SC): A1PYU13E1127
          • Motherboard Model: IP3_ACN16_MB_V21_20211222A
          • Power Input: DC 19V –
          ...
          02-28-2025, 02:43 AM
        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • Loading...
        • No more items.
        Working...