42pfl3606h/12 Phillips tv powersupply/backlight problem

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Ahigherprimate
    Member
    • Apr 2014
    • 18
    • Ireland
    #21
    Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

    Tom66 is very busy at the moment and won't be able to repair my board for me so I just decided to replace the whole board and am finding it hard to find a replacement part, can anybody point me towards a site that would stock it? When I search for it I jus look for parts and the model number of my TV, is this the best way to find it or is der a specific part number for the board that I should be searching for?

      Comment

      • vinceroger69
        Badcaps Legend
        • Mar 2012
        • 6714
        • uk
        #22
        Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

        whats the number from the power supply you need?

          Comment

          • Ahigherprimate
            Member
            • Apr 2014
            • 18
            • Ireland
            #23
            Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

            Tom66 is very busy at the moment and won't be able to repair it for me so I've decided to try to replace the board but I'm finding it hard to find one, could anybody point towards a site that would stock what I need. I tried searching for parts for the model number of the TV with no luck but is there a number for the specific part I need that I should be looking for?

              Comment

              • Ahigherprimate
                Member
                • Apr 2014
                • 18
                • Ireland
                #24
                Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

                I'm not sure what the number is where will I find it? Its just printed on the board I guess is it?

                  Comment

                  • Caleb
                    Smokin IC's
                    • Feb 2013
                    • 645
                    • USA
                    #25
                    Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

                    I looked without success off your model number, can we get a picture of the sticker on the back to see what the chassis number is?
                    Liberating magic smoke one part at a time

                      Comment

                      • Ahigherprimate
                        Member
                        • Apr 2014
                        • 18
                        • Ireland
                        #26
                        Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

                        Is this the sticker your looking for?
                        Attached Files

                          Comment

                          • Caleb
                            Smokin IC's
                            • Feb 2013
                            • 645
                            • USA
                            #27
                            Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

                            Yes the chassis is TPM6.1E LA, with that info I did find a service manual. The power supply appears to be made by Bush, I found several that were very close, but none with the same number (715G4802-P01-H20-003H) Im wondering if there was a more popular version with the same pinouts made? Unfortunately all of our resources on this side of the pond do no good for a European version. I found an amazon listing but of course they are out of stock

                            as an afterthought have you tried the philips repair call center? says they may contribute to out of warranty repairs
                            Last edited by Caleb; 04-30-2014, 01:59 PM.
                            Liberating magic smoke one part at a time

                              Comment

                              • al1
                                New Member
                                • Sep 2014
                                • 1
                                • ireland
                                #28
                                Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

                                Originally posted by Ahigherprimate
                                Is this the sticker your looking for?
                                Hi.
                                Did you have any look with your tv?i have the same tv as yours and one part on the board blow up the last day..IC905..just wondering if you got another board some where.
                                thank you
                                Attached Files

                                  Comment

                                  • Clydeuk
                                    Senior Member
                                    • Jan 2012
                                    • 193
                                    #29
                                    Re: 42pfl3606h/12 Phillips tv powersupply/backlight problem

                                    Since you now have no power at all have you checked the fuses? If any have popped you will need to check for a short beyond the fuse before trying a replacement. With the meter on an ohms setting and power applied you will be applying a low resistance across anything you apply the probes to, so the outcome is always likely to be a pop. Always test resistance with the power off.

                                      Comment

                                      Previous 1 2 template Next

                                      Related Topics

                                      Collapse
                                      • courtcircuit
                                        Philips HTS8000 home cinema noise problem
                                        by courtcircuit
                                        Hello

                                        I have since a long time a Philips HTS8010S/01 which has been old but was doing the job.

                                        Since a few days, it starts by making a weird "static" nois when switches on for a few seconds to a minute and then works like a charm.
                                        Noise loudly outputs from the 3 channels, even if no signal is sent by the controler.DVD to the subwoofer/amp unit.

                                        I was thinking of a soldering that was starting to be damaged and that was only doing the job after a few seconds of heating, most probbaly on the power board
                                        Removed each of tyhe boards
                                        ...
                                        02-08-2025, 08:22 AM
                                      • theone111
                                        Problem with LG Plasma 60PM6700 - Random power downs
                                        by theone111
                                        I have an LG Plasma TV 60PM6700 for the past ~12 years.

                                        In the last ~3-4 months I have been having some issues.
                                        1. Problem: It started with random picture disappearing (sound still worked).
                                          Frequency: Happened about once a week.
                                          Solution: Had to turn off TV wait a few seconds before turning it on again.
                                        2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                                          Frequency: Happened about once a week.
                                          Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                                        3. Problem: TV shuts down
                                        ...
                                        1 Photo
                                        07-22-2024, 10:36 AM
                                      • Zeonalbasta
                                        Thinkpad X1 Carbon "LMQ-1MB 12298-2 48.4LY26.021" VCC3M problem
                                        by Zeonalbasta
                                        i have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
                                        The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double...
                                        09-13-2024, 01:17 PM
                                      • tony359
                                        Removing electrical noise introduced by fan
                                        by tony359
                                        Hi all,

                                        I am working on a sound processor, it tends to overheat so I fitted a fan inside. The fan is connected to the +15V of the PSU via a DC-DC converter based on the LM2596 to reduce the voltage to around 10.5V.

                                        Unfortunately the analogue circuitry is picking up the noise from the fan in two ways:
                                        1. The fan is close to the analogue section, the motor itself gets into the outputs so I'll have to move it somewhere else
                                        2. Even with the fan running outside of the case, there is still some noise which is clearly going back to the processor via power line....
                                        2 Photos
                                        11-28-2023, 05:18 AM
                                      • MegaZAC
                                        Onkyo TX-SR805 noise in one channel
                                        by MegaZAC
                                        Surprisingly enough, this receiver doesn't have the DSP chip issue. The HDMI board does not get hot, and sound over HDMI works fine.

                                        Regardless of the input, the right channel has noise that is clearly noticeable even on average volume level. The only cases when there's no noise is when VCR input is selected (some tracks on the board are damaged, maybe that's why), or if HDMI input is selected but nothing plugged into it. In all other cases, even when no input is connected I still have the noise.

                                        There's some logic behind it. As soon as I select an input I get only left...
                                        04-23-2025, 10:09 PM
                                      • Loading...
                                      • No more items.
                                      Working...