LG 42lg5000-za problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • domix
    Senior Member
    • Jan 2014
    • 159
    • Slovenia
    #1

    LG 42lg5000-za problem

    I had a half screen problem, so i fixit like this one : https://www.youtube.com/watch?v=mpp14G-c9Yo

    and everything works perfect. So i had TV on and i want to take metal frame back on the tv. When i touch a metal frame whit these two board on top, the picture in a second became white, anda than this is happend like on video.

    What to do?
    Attached Files
    Tags: None
    • domix
      Senior Member
      • Jan 2014
      • 159
      • Slovenia
      #2
      Re: LG 42lg5000-za problem

      I gave the metal frame one again on tv and there was smoke (picture). now i have only half of picture?
      Attached Files

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: LG 42lg5000-za problem

          You might have damaged the LCD panel drivers.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • domix
              Senior Member
              • Jan 2014
              • 159
              • Slovenia
              #4
              Re: LG 42lg5000-za problem

              How to fix it?

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: LG 42lg5000-za problem

                  In this case it would probably not be repairable because the driver chips are bonded to the screen, you cannot replace them. Sorry.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • domix
                      Senior Member
                      • Jan 2014
                      • 159
                      • Slovenia
                      #6
                      Re: LG 42lg5000-za problem

                      This is this 8th flat cables which comes out from opanel and go on two circuts on the top of tv? Than i must to replace whole panel whit this? or i can replace only this drivers? how? can u give me some direction what can i to do?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • howardc64
                          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                          by howardc64
                          Problem

                          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                          08-04-2024, 10:36 PM
                        • Kemer
                          Graphics Card mounting frame
                          by Kemer
                          Hello, I removed the graphics card from my laptop and I want to heat it in the oven. What I want to ask is, is it okay to heat the card without removing the metal mounting frame on it?

                          As you can see in the photo, there is a plastic (black) gasket between the metal frame and the card. It sticks the frame tightly to the card.

                          I previously removed the metal frame while heating it, but it is quite difficult to separate it from the surface it is attached to. If there is no problem, I do not want to remove it.

                          What worries me right now is the possibility that...
                          09-14-2024, 08:57 AM
                        • theone111
                          Problem with LG Plasma 60PM6700 - Random power downs
                          by theone111
                          I have an LG Plasma TV 60PM6700 for the past ~12 years.

                          In the last ~3-4 months I have been having some issues.
                          1. Problem: It started with random picture disappearing (sound still worked).
                            Frequency: Happened about once a week.
                            Solution: Had to turn off TV wait a few seconds before turning it on again.
                          2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                            Frequency: Happened about once a week.
                            Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                          3. Problem: TV shuts down
                          ...
                          1 Photo
                          07-22-2024, 10:36 AM
                        • VikramB
                          Samsung QN55LS03 | The Frame TV | Weird power cycle and restart problem
                          by VikramB
                          First thread here on this forum, excuse me if I miss something in my first post.

                          I have the 55” variant of the Frame TV which is essentially a QLED tv. There's a weird problem where it would keep on restarting on its own. Funny thing is it might work perfectly for couple of days and then decides to go down the restart route. A few pointers:
                          1. If I let the TV sit idle for a day, for the very first time it boots after that time period it usually keeps working for 5 minutes before restarting. After that it restarts every 5 seconds.
                          2. I've tried the tape method and...
                          03-17-2023, 02:56 PM
                        • Zeonalbasta
                          Thinkpad X1 Carbon "LMQ-1MB 12298-2 48.4LY26.021" VCC3M problem
                          by Zeonalbasta
                          i have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
                          The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double...
                          09-13-2024, 01:17 PM
                        • Loading...
                        • No more items.
                        Working...