Re: Samsung QN55LS03 | The Frame TV | Weird power cycle and restart problem

Update: Got a professional to look into the issue. A panel COF is the culprit. Will probably have to get the whole panel replaced since the part is not available here.

Re: Samsung QN55LS03 | The Frame TV | Weird power cycle and restart problem

Aah right the caps. Even a weak solder joint too could be the culprit. I guess I’ll just seek some professional help. Samsung quoted me an insane amount for the panel. They don’t do repairs anymore. Instead they just change the complete part.

Re: Samsung QN55LS03 | The Frame TV | Weird power cycle and restart problem

One thing I’m still not sure about is the varying time between restarts. A short, if it’s there somewhere, is a SHORT after all. It shouldn’t be unpredictable. For instance the TV is running fine for the last 2 hours, making me scratch my head even further.

Re: Samsung QN55LS03 | The Frame TV | Weird power cycle and restart problem



Thanks for the prompt response. As a matter of fact, I saw the exact same video before going ahead with the tape fix. Unfortunately this particular model doesn't have an isolated TCON board. Also, the COF strip has a connection for the right part of the screen, but the left part is soldered. I've tried disconnecting the right side and it still restarts. Can't check the left part though

Now, coming to what's shown in the video, I've actually tried taping those CLK pins but...

First thread here on this forum, excuse me if I miss something in my first post.

I have the 55” variant of the Frame TV which is essentially a QLED tv. There's a weird problem where it would keep on restarting on its own. Funny thing is it might work perfectly for couple of days and then decides to go down the restart route. A few pointers:
1. If I let the TV sit idle for a day, for the very first time it boots after that time period it usually keeps working for 5 minutes before restarting. After that it restarts every 5 seconds.
2. I've tried the tape method and...

Re: Samsung qn55q60raf powercycle

I realise it’s an old thread but did the OP manage to root cause the problem? Facing a similar issue on my 55” Frame TV.