LG 42" 42LG3000 - Buzzing Inverter

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • safesurfer65
    Senior Member
    • Feb 2014
    • 112
    • Scotland

    #1

    LG 42" 42LG3000 - Buzzing Inverter

    Hi folks

    Got a 42" LG 42LG3000 LCD tv in. Its working fine but the inverter (part no. VIT71053.51) is making a rather annoying buzzing noise. I presume replacing it will solve the problem. Any experience with this kind of issue ?

    Many thanks

    Mark
  • aar5384
    Senior Member
    • Jan 2014
    • 82
    • England

    #2
    Re: LG 42" 42LG3000 - Buzzing Inverter

    Just to add ive been offered the same model of tv today where it wont come on for about 20 - 25 mins, basically until its warmed up

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: LG 42" 42LG3000 - Buzzing Inverter

      Originally posted by aar5384
      Just to add ive been offered the same model of tv today where it wont come on for about 20 - 25 mins, basically until its warmed up
      Likely bad panel, common on these. Not aware if anyone has fixed it.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • yesimxev
        New Member
        • Feb 2016
        • 2
        • UK

        #4
        Re: LG 42" 42LG3000 - Buzzing Inverter

        Did the inverter changing solved the problem? I have the same issue. Both of them make fizzing / buzzing noise.
        Hope you'll see this message

        Comment

        Related Topics

        Collapse

        • eccerr0r
          inverter H tree driver imbalance in an AC inverter
          by eccerr0r
          My cheap crappy 1KW grid tie inverter (GTI) seems to keep blowing IGBTs. When I first got it, it had two failed IGBTs. It used four 60N100's (TO264). I bought 5 from a dubious source (fleabay) and replaced just the two that were dead. The GTI worked for almost two years but recently one of the two that I replaced failed. Since I had three spares, I replaced the dead one. Then a few weeks later it failed again. Weird. Well since I bought dubious China-sourced IGBTs from fleabay it could very well just be a mixture of fakes. I replaced it, but then a day later it failed again! I put in the last...
          11-16-2025, 12:34 PM
        • x_orange90_x
          Vizio E55-E1 bad backlights or bad inverter?
          by x_orange90_x
          I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

          I don't know how exactly to test the inverter itself. Is it...
          01-29-2025, 09:24 PM
        • LEECH666
          Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
          by LEECH666
          Good day ladies and gentleman!

          I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

          This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

          I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
          01-19-2024, 05:46 PM
        • Gentian
          APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger schematic
          by Gentian
          I have a tripp-lite aspint 3636vr inverter charger which blow some of mosfet transistors. I replaced them repaired also the driver circuit and tested but the mosfets burn again.

          It work very well as inverter and also as charger if I let the rear switch in auto mode (inverter) and charger only(charging) but in auto when I connect the feed line 220V AC first time it pass ok to line and start charging the batteries but when I remove the feed line it pass to inverter mode and if I do it again the second time when passing from charging to inverter the Main transformer start making a...
          03-06-2023, 07:07 AM
        • valvashon
          Insignia NS-LCD19-09 (PS OK, Inverter problem?)
          by valvashon
          For some reason I'm just not going to let this 19" TV defeat me. I guess because I have a schematic to work from I feel like I'm oh so close.

          History- while adding a turn-on circuit I let a small screw roll under the power board. Worked through all of that circuitry, probably replacing a MOSFET and PWM controller that were not bad but I was following the service manual. Finally figured out that the power supply is in working order when the inverter section (for the backlights) is disconnected. When the +12 supply to the inverter is disconnected the +12 and +5 will come up...
          01-04-2024, 01:44 PM
        • Loading...
        • No more items.
        Working...