Techinka 46" LCD no diplay

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #21
    Re: Techinka 46" LCD no diplay

    ive just looked again they look ok what main board does this sey use? picture and part number from the board if possible.

    Comment

    • jwilliams1967
      Senior Member
      • Apr 2014
      • 54
      • uk

      #22
      Re: Techinka 46" LCD no diplay

      hi the model number is 17pw46-4 . the picture of the board is in the first post and a schematic is a little further down . this is really frustrating me . I have now replaced all of the caps . the 2 large caps I used Panasonic . have checked for bad solders . I am a novice but do have some electronics skills from my uni days . thanks vinceroger for your help my friend

      Comment

      • vinceroger69
        Badcaps Legend
        • Mar 2012
        • 6714
        • uk

        #23
        Re: Techinka 46" LCD no diplay

        the main board is the one with the scart socket etc on as your psu appears to have the correct voltages maybe its a problem with the main board. may be budm or tom will advise too on what next to test

        Comment

        • rauno45
          Member
          • Jan 2013
          • 48
          • Estonia

          #24
          Re: Techinka 46" LCD no diplay

          Maybe a closer picture from the main board would also help? in first picture the main board is too far to make out anything that is on there.
          Last edited by rauno45; 05-04-2014, 06:09 AM.

          Comment

          • jwilliams1967
            Senior Member
            • Apr 2014
            • 54
            • uk

            #25
            Re: Techinka 46" LCD no diplay

            hi here is some more pics of the mainboard . model number is 47743236325 or 26536324 or sd1ha07 . many thanks
            Attached Files

            Comment

            • sordids999
              Badcaps Legend
              • May 2013
              • 2152
              • uk

              #26
              Re: Techinka 46" LCD no diplay

              Not sure if this would help but I had the same problem with my 42 inch no back light etc but the minute I disabled the LVDS cable it came on in the end a replacement main board fixed it

              Comment

              • jwilliams1967
                Senior Member
                • Apr 2014
                • 54
                • uk

                #27
                Re: Techinka 46" LCD no diplay

                have tried that .it didn't help but thanks anyway

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk

                  #28
                  Re: Techinka 46" LCD no diplay

                  this thread has the same psu and maybe main board as your how do the voltages match too yours?
                  https://www.badcaps.net/forum/showthread.php?t=23082

                  Comment

                  • jwilliams1967
                    Senior Member
                    • Apr 2014
                    • 54
                    • uk

                    #29
                    Re: Techinka 46" LCD no diplay

                    it appears that i should have about 9 volts on pin 4 . will look at this .

                    Comment

                    • RJARRRPCGP
                      Badcaps Legend
                      • Jul 2004
                      • 6304
                      • USA

                      #30
                      Re: Techinka 46" LCD no diplay

                      Sounds like it's not detecting video input.
                      ASRock B550 PG Velocita

                      Ryzen 9 "Vermeer" 5900X

                      32 GB G.Skill RipJaws V F4-3200C16D-32GVR

                      Arc A770 16 GB

                      eVGA Supernova G3 750W

                      Western Digital Black SN850 1TB NVMe SSD

                      Alienware AW3423DWF OLED




                      "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

                      "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

                      "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

                      "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

                      Comment

                      Related Topics

                      Collapse

                      • cheeky2
                        Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                        by cheeky2
                        I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                        Obviously the same LVDS connector for the screen connection...
                        05-25-2024, 03:27 AM
                      • Dani_2024
                        Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                        by Dani_2024
                        Hi and thanks in advance for any input you might provide!
                        I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                        Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                        Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                        10-28-2024, 05:06 PM
                      • ygorsan
                        LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
                        by ygorsan
                        Hi everyone,




                        I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







                        🧩 Problem Summary:
                        • The TV keeps scrolling through the menu or selecting items by itself.
                        • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
                        • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
                        • I
                        ...
                        07-28-2025, 08:34 AM
                      • Asraf Atb
                        Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                        by Asraf Atb
                        Hi everyone,

                        Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                        Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                        I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                        01-27-2025, 05:02 PM
                      • JSin21
                        Compatibility of main boards between different variations of samsung MU6100
                        by JSin21
                        Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;

                        I have Samsung Smart TV UA65MU6100WXXY version DA01

                        Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months...
                        11-27-2023, 04:54 AM
                      • Loading...
                      • No more items.
                      Working...