Should I buy a VP50 Vizio Plasma for 50 dollars?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bobotech
    Member
    • Aug 2004
    • 14

    #1

    Should I buy a VP50 Vizio Plasma for 50 dollars?

    Its a gamble, but should I take it? My local recycler has a VP50 Vizio 50" plasma tv for 50 dollars. It has a power light that goes orange when plugged in and when you hit the power button, it turns green but no picture.

    I used a flash light and can see several blown caps on the board near the top middle of the tv through the vents.

    I might be able to get it for 40.
  • Glitcher
    Badcaps Veteran
    • Mar 2013
    • 673
    • USa

    #2
    Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

    if its just bad caps itll be worth it, but these are also known for bad ysus and buffer boards that can cost $200+ to replace or $50 at least to repair.

    You could probably get away with selling the ysus and buffers as is for parts to make your money back if it doesn't work out plus all the other parts too.
    Last edited by Glitcher; 04-15-2014, 03:26 PM.

    Comment

    • Shinju
      Badcaps Legend
      • Mar 2014
      • 1239
      • USA

      #3
      Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

      I am going through hell with one right now, if its the LG made version like mine its going to be more then caps. I replaced 9x 3300uf and 1x 1000uf caps on the PS all were leaking and it didn't not help. I hear the Samsung version has better luck with just replacing caps.

      Mine was doing what the one you are looking at, it would turn on stay green and get no picture. And its doing the same after the recap.


      Good luck! Also one thing to keep an eye out for is to make sure you don't pick it up with out the back on, the panel is held in by the back piece and it will fall if you tip it right side up.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

        I don't pay for IPM-based LG plasmas, too many problems. You could fix the IPMs then be stuck with bad buffers, sparklies or burn in. Not worth it...
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Shinju
          Badcaps Legend
          • Mar 2014
          • 1239
          • USA

          #5
          Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

          If you do get the LG model here is my thread, feel free to use it and post in it too.


          https://www.badcaps.net/forum/showthread.php?t=36819

          Comment

          • bobotech
            Member
            • Aug 2004
            • 14

            #6
            Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

            How can you tell who made it? The one at the recycler is the vp50 hdtv10a model. Doesn't seem to be as common as the hdtv20a when I google.

            Comment

            • Shinju
              Badcaps Legend
              • Mar 2014
              • 1239
              • USA

              #7
              Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

              Back of the screen itself, top left or right. You will need to remove the cover.

              Comment

              • xredhawk
                Senior Member
                • Jul 2011
                • 103

                #8
                Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

                i dont like vizio/lg plasma

                Comment

                • bobotech
                  Member
                  • Aug 2004
                  • 14

                  #9
                  Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

                  I think I'm gonna pass on this one. Sure I would like to fix a giant tv but if it isn't a good gamble and a lot of work, not really worth it.

                  Comment

                  • bobotech
                    Member
                    • Aug 2004
                    • 14

                    #10
                    Re: Should I buy a VP50 Vizio Plasma for 50 dollars?

                    Went back today. It was gone. Good. LOL

                    Comment

                    Related Topics

                    Collapse

                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      11-22-2024, 01:46 PM
                    • SS454
                      vizio e650i-a2 backlight flashes then turns off
                      by SS454
                      vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.

                      panel: au optronics T650HVN05.4
                      72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
                      link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1

                      Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
                      https://www.shopjimmy.com/vizio-56-0...-power-supply/

                      Vizio 55.75J01.001G (91.75J10.004G) Main Board...
                      08-20-2020, 03:57 PM
                    • mrtek
                      Vizio M65-C1
                      by mrtek
                      Hi.

                      picked up another TV. This time is a Vizio M65-C1. TV does not turn on. I had repaired another 60 inch vizio , Bad main board.
                      When power button is pressed, the Power led indicator on the bottom right, turns for a few seconds and then it fades away. No backlight or Vizio logo on screen. Removed back cover and repeated test.
                      This is the TV This TV is a little different from the Samsung I have worked on. Power supply is on the Left side, Main Bd is on the right side, T-CON , not in the picture is on the bottom. I am assuming that the boards in the middle are the LED...
                      07-14-2025, 07:28 PM
                    • howardc64
                      Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
                      by howardc64
                      Failure Symptom



                      No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

                      Where is the short?

                      Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



                      Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
                      05-27-2025, 02:56 PM
                    • howardc64
                      Vizio SmartCast TV software bug that looks like hardware
                      by howardc64
                      Bug looks like hardware so thought I posted it here. Exact same behavior on 2 different model 4K Vizio TVs running their SmartCast smarttv software. After launching youtube app, press vizio button on remote to return to the smarttv menu, once in awhile, a column of bad pixels will show for few seconds on the left hand side.



                      It seems the vizio software is reinitializing hardware when returning to the smarttv menu. In general, SmartCast software isn't very good. Also will randomly (relatively infrequent) get no network connection when on wifi and require reboot....
                      11-16-2024, 05:17 PM
                    • Loading...
                    • No more items.
                    Working...