Loewe Xelos A 37 black screen/no sound.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sadistic Taste
    Senior Member
    • Mar 2014
    • 72
    • UK

    #1

    Loewe Xelos A 37 black screen/no sound.

    Hi all,

    I have a Loewe Xelos A 37 here. When I turn it on, I get green light, slight flicker sound from speakers, but nothing on the screen. I need help troubleshooting this, I don't know which board to replace/repair.

    Anyone have any experience with this set?

    Thanks
  • Sadistic Taste
    Senior Member
    • Mar 2014
    • 72
    • UK

    #2
    Re: Loewe Xelos A 37 black screen/no sound.

    I pulled the power supply, and done some poking around. I can only do basic testing with a multimeter, looking for shorts etc. All caps look ok, but I don't have an esr meter.

    There does appear to be some scorching at L1010, T1002 etc. Also D1012 is shorted. That's as far I can see.

    I'm new to electronics, but I'm learning I have decent soldering skills, and can solder and de-solder small components no problem.
    Attached Files
    Last edited by Sadistic Taste; 03-25-2014, 04:17 AM.

    Comment

    • Sadistic Taste
      Senior Member
      • Mar 2014
      • 72
      • UK

      #3
      Re: Loewe Xelos A 37 black screen/no sound.

      Bottom side - for some reason only one picture uploaded. Using my phone.
      Attached Files

      Comment

      • Telefixer
        Member
        • Mar 2015
        • 11
        • New Zealand

        #4
        Re: Loewe Xelos A 37 black screen/no sound.

        Hi there

        Did you fix this? I've got one to work on now, shuts down after a short while. Loewe TVs drive me nuts.

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain

          #5
          Re: Loewe Xelos A 37 black screen/no sound.

          We dont know if he fixed it because he never BOTHERED to update the thread, please dont do what he has done as it really pisses people off.

          For your Tv Telefixer after it does shutdown likely after it heats up, you can take a hair dryer to it and heat it up, doing this could speed up the processes of whatever is failing in the Tv and becoming heat-sensitive so heat one board at a time and see if the Tv fails.
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

          Comment

          Related Topics

          Collapse

          • Mgiffune
            Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
            by Mgiffune
            I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

            I ordered a supposedly ‘new' Tcon board this time, and
            ...
            06-09-2024, 10:28 AM
          • Audeze
            Sony XBR-75X950G seems dead with a black screen but backlight and sound is working and no blinking red lights
            by Audeze
            I have a 2019 75" x950g, and while playing a movie, the screen suddenly went dark in a weird way, where it faded towards one corner into being fully black. Now the TV turns on, and the backlight comes on, but there is nothing displayed except black. Sound still comes through the TV speakers, and i have tried doing a hard reset using the volume - and power buttons while plugging the display back in, but it did not fix it. I can confirm that pressing buttons on my remote is still doing "something" because I'm hearing sound still, even though the screen is black.

            Does...
            10-06-2024, 08:54 PM
          • HTR-Informatique
            Dell G3 15 3500 - Battery bug (black screen and flashing keyboard backlight)
            by HTR-Informatique
            Hello,

            YouTube video of the problem encountered: https://youtube.com/shorts/q7TLNv36LUo

            I am a pro and I have a problem that I have never seen despite my 7.5 years of experience on my own and my thousands of repairs, on a customer's Dell G3 15 3500.

            On this PC I have already changed the complete palmrest because the keyboard was no longer working properly.

            I also changed the screen because the PC fell and the screen was broken.

            I changed the battery with a new and original battery.

            I also had corrosion/oxidation on the...
            02-09-2025, 06:51 AM
          • totof
            LG 43UF640V backlight good but black screen and no sound
            by totof
            Good morning.
            I have a problem with my LG Smart 43UF640V TV. It starts, the backlight comes on but nothing is displayed on the screen and there is no sound.
            I thought it was a TCon problem and ran various tests. If I disconnect one or the other of the cables from the tcon to the panel then the screen is white on the side where the cable is disconnected and black on the other side. If the two cables are disconnected the screen is completely black.
            In the 4 configurations I measure exactly the same voltages on the tcon card (model V15 43UHD TM120 Ver0.4) :

            HVDD : 7,28...
            04-13-2024, 11:37 PM
          • howardc64
            A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
            by howardc64
            Problem

            This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
            08-04-2024, 10:36 PM
          • Loading...
          • No more items.
          Working...