the fault with these I believe is the PFC controller or the VCC to it. I have only done a preliminary investigation nothing thorough. Sometimes the cap goes bad, this usually ills the MOSFET/diode though.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
may be a light thing,but in the corner of the heatsink of the power supply,just to the right of the large transformer with copper coils showing,looks like a capacitor there,in the reflection of the heatsink it looks like a split in the top of it,cant quite see?,have a check
fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
may be a light thing,but in the corner of the heatsink of the power supply,just to the right of the large transformer with copper coils showing,looks like a capacitor there,in the reflection of the heatsink it looks like a split in the top of it,cant quite see?,have a check
false alarm,that picture is better,cap looks fine,must have been reflection
fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
ok so had a spare psu fitted that 12 volts are now upto 11.5 volts and the 5 volts are now 4.7 volts,even the 24 volt invertors are now 23.5 volts but still i have the red lines ive attached a video to show this im sure i have all replacement parts to swop around for this tv so..... its going to be a long night
I'd swap main board first, then t-con; if they are fine, I cannot see anything else causing this (they could be bad boards possibly.)
At least I think that the panel is fine.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Typical board numbers match up but some connections different, so I think I'll take a chance on ordering a replacement board and praying it's not the screen after all my friend did say originally he could use the pc connection fine but avi and hdmi played up
connect another tv to the tv being repaired via a scart lead,hdmi lead etc
does the lines go away?it will confirm the mainboard is working if they disappear.,if still there ,then likely the mainboard is fried.
fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
I'm not aware of any method where a TV will output image over HDMI? Some TVs do it via SCART, but beware this is often not a processed signal. It is simply switched through to the output, only thing that would cause issue with it is a supply rail going missing.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
ive only ever tried it via scart,tv link to link..,the output video signal should still be a proccesed signal,coming from the video processor on the main board,if this bga chip or whatever it is that is processing the video has gone bad,it will output bad video on the donor tv via scart,and obviously the tv being fixed.
and it could narrow it down to either the t-con or panel fail.
im not saying that it works for all tv's,but it has worked twice for me,mainly on re-badged tv's
fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
nothing as in what?,black screen/picture/the same?,have you switched the working tv through to its av channel?,scroll through each input on good tv.
if your not getting nothing then it has to be a mainboard fail.
ive never seen a T-CON displaying those kind of lines before,vertical yes,horizontal no.
fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
ive only ever tried it via scart,tv link to link..,the output video signal should still be a proccesed signal,coming from the video processor on the main board,if this bga chip or whatever it is that is processing the video has gone bad,it will output bad video on the donor tv via scart,and obviously the tv being fixed.
If it has OSD, it is processing it, in my experience though most do not do any processing, that is expensive, simply a pass through engaged when inputs are inactive.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Definitely a intermittent fault somewhere now the tv is working fine
hmmm,dry joints?,you said you connected via HDMI?,something just jogged my memory,have you blasted out the hdmi ports with contact cleaner?,they can cause this issue also through dust hairs etc,as with a hdmi lead that is not inserted correctly.
connecting using scart only,my typo error in previous post,it wont output in hdmi .only scart,my bad .
fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
Spoke to his girlfriend last and got a different story lol quote:
It worked properly but we kept losing signal and id have to wiggle the ariel on the bk to get picture back and sometimes it would go and I wouldnt be able to get it back for a few hours also when using scart it would cut out, wasnt all the time but every few days. Picture wise it was perfect no red lines or anything. When I used the pc through it I never had 1 problem
Comment