Emerson LC320EM2 Dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CraigR
    Badcaps Veteran
    • Dec 2013
    • 959
    • USA
    #1

    Emerson LC320EM2 Dead

    Hello all! This time I have a Emerson LC320EM2 that is dead with no light or any sign of power. I read through a couple other threads here on this model and it seems my tv is a little different. The fuse is good and I visually checked over the caps or anything that might have gotten hot. I also tested the diodes on the hot side and came out good. I did see that they make a power board repair kit for $25 and was wondering if I should just get that but according to another thread on this TV it did not help out the other guy. Does anybody have an opinion on this??
    Attached Files
    Tags: None
    • CraigR
      Badcaps Veteran
      • Dec 2013
      • 959
      • USA
      #2
      Re: Emerson LC320EM2 Dead

      Well I just removed the board to have a look at the underside and it looks like someone was in there I'm guessing to put that kit in and had way too hot an iron and just destroyed the traces on the board so looks like I need another board now.

        Comment

        • CraigR
          Badcaps Veteran
          • Dec 2013
          • 959
          • USA
          #3
          Re: Emerson LC320EM2 Dead

          I hate to revive an old thread but since this post I have done about 8 of these TV's and just get a kit and it has always fixed the tv until now. After installing the kit still no power but now high pitch squeal. Just wondering if anybody has a quick answer without going into major diagnostics?

            Comment

            • CapLeaker
              Leaking Member
              • Dec 2014
              • 8179
              • Canada
              #4
              Re: Emerson LC320EM2 Dead

              Question is what components did you replace?
              Did you force the PSU on without the main board?

              Here is what I did to mine: https://www.badcaps.net/forum/showth...hlight=emerson
              Last edited by CapLeaker; 07-11-2016, 05:25 PM.

                Comment

                • CraigR
                  Badcaps Veteran
                  • Dec 2013
                  • 959
                  • USA
                  #5
                  Re: Emerson LC320EM2 Dead

                  Diode D604
                  Diode D605
                  Diode D607
                  Diode D609
                  Diode D610
                  Diode D640
                  Resistor R602
                  Resistor R605
                  Resistor R606
                  Resistor R608
                  Resistor R611
                  Transistor Q600
                  Mosfet Q601
                  Fuse F601
                  Did not force anything on.
                  Last edited by CraigR; 07-11-2016, 06:19 PM.

                    Comment

                    • CapLeaker
                      Leaking Member
                      • Dec 2014
                      • 8179
                      • Canada
                      #6
                      Re: Emerson LC320EM2 Dead

                      you switched diode D605 twice? or is that a typo?

                        Comment

                        • CraigR
                          Badcaps Veteran
                          • Dec 2013
                          • 959
                          • USA
                          #7
                          Re: Emerson LC320EM2 Dead

                          LOL yep typo

                            Comment

                            • CapLeaker
                              Leaking Member
                              • Dec 2014
                              • 8179
                              • Canada
                              #8
                              Re: Emerson LC320EM2 Dead

                              Did you measure all voltage rails when this thing is chirping? I am thinking something is shorted and loading the PSU down.

                                Comment

                                • CraigR
                                  Badcaps Veteran
                                  • Dec 2013
                                  • 959
                                  • USA
                                  #9
                                  Re: Emerson LC320EM2 Dead

                                  No, unplugged it right away because i did not want to fry anything. I was hoping somebody might have ran into this before and might see what I missed replacing.

                                    Comment

                                    • CapLeaker
                                      Leaking Member
                                      • Dec 2014
                                      • 8179
                                      • Canada
                                      #10
                                      Re: Emerson LC320EM2 Dead

                                      Does it chirp in STBY or did you turn the TV on?

                                        Comment

                                        • CraigR
                                          Badcaps Veteran
                                          • Dec 2013
                                          • 959
                                          • USA
                                          #11
                                          Re: Emerson LC320EM2 Dead

                                          Just plug it in and a very quiet steady squeal. No light on front and TV will not turn on either.

                                            Comment

                                            • CapLeaker
                                              Leaking Member
                                              • Dec 2014
                                              • 8179
                                              • Canada
                                              #12
                                              Re: Emerson LC320EM2 Dead

                                              did you disconnect the main board and plug the PSU in?

                                                Comment

                                                • CraigR
                                                  Badcaps Veteran
                                                  • Dec 2013
                                                  • 959
                                                  • USA
                                                  #13
                                                  Re: Emerson LC320EM2 Dead

                                                  Yes, same results.

                                                    Comment

                                                    Previous template Next

                                                    Related Topics

                                                    Collapse
                                                    • Beton
                                                      Finding a dead short component
                                                      by Beton
                                                      Hi guys!
                                                      I searched for the term "dead short" in the forum but no specific thread came up however if I'm just blind and couldn't see the thread talking about this please forward me to that direction.
                                                      So my problem is I don't know how to find the source of a dead shorted voltage rail. Dead short = ~0 ohm resistance.
                                                      I have two VGAs (HD 4850 and HD 4870), both dead shorted to ground on the memory rail. I have the boardview file for the 4870 and the memory rail consists around ~7892346 capacitors...
                                                      I have a bench PSU and if I try to inject voltage the voltage...
                                                      12-10-2021, 01:05 PM
                                                    • jacobtc
                                                      Dead ASUS ROG G14 (GA401)
                                                      by jacobtc
                                                      Hi!

                                                      It seems like all the laptops I get are dead G14's. I already had two, in which one was fixable, and one wasn't. This one is different though, I promise!

                                                      The previous owner used it without a screen, as the panel was dead, and suddenly it just died.

                                                      The board looks fine, no visually burnt components as I can see.
                                                      I do not get a short on the DC-In mosfets, however as I had with one of my other machines, the first mosfet does not seem to let voltage through, so the second mosfet does not receive 20V. (See pic).

                                                      Only the BQ chip...
                                                      02-14-2023, 11:42 AM
                                                    • Ghostalker
                                                      Zephyrus G14 GA401QM dead
                                                      by Ghostalker
                                                      Hello I have an ASUS Zephyrus Laptop (Model GA401QM), bought on ebay and the previous owner claims he was using and the laptop stopped, He then tried to change battery and broke the connector on the battery and also on ripped a GND pad on the MB.

                                                      I was searching on internet and found two posts on this forum about a similar problem “ASUS ROG G14 (GA401) battery spark, dead.” and “Dead ASUS ROG G14 (GA401)” both by the user jacobtc.

                                                      I already made some measurements based on the “Dead ASUS ROG G14 (GA401)” post using GA401QM schematic provided here and Boardview provided...
                                                      09-06-2023, 03:20 PM
                                                    • corrize
                                                      ASUS Zenbook UX433 DEAD
                                                      by corrize
                                                      Hello, I have a Zenbook UX433. (No schematic nor boardview bur I have another same model, in working state tp compare).
                                                      It is dead : no light, nothing. And when I press power button : nothing. 19v is OK. I checked charging IC (battery removed) and the chip match ok but 3 flags are differents :

                                                      ACDET (pin6) UX433 good : 2.66v, UX433 dead : 3.1v
                                                      PROCHOT (pin10) – UX433 good : 5v, UX433 dead : 0v
                                                      TB_STAT (pin16) – UX433 good : 3.2v, UX433 dead : 0v

                                                      Do you know if it's bad or not pls ? (See below, the details of these flags)

                                                      I...
                                                      12-09-2021, 04:24 PM
                                                    • Donny2derby
                                                      LGOLED55B7V Clicking and dead screen.
                                                      by Donny2derby
                                                      Picked this up other week and when I originally looked at in the sellers house I got 3/4's of a working screen and some horizontal lines across the 1/4 of it which was dead/black.

                                                      Just tried powering it up at home and now all I'm getting is a clicking and some very faint lines on 1/4 of the screen whilst the entirety of it is dead.

                                                      When using the remote I get two red clicks on the standby. Not sure if this means anything or helps. The same when I use the manual power up.

                                                      Help appreciated. I'm an electrician, I've fixed a few in the past so not a total...
                                                      08-10-2023, 04:23 AM
                                                    • Loading...
                                                    • No more items.
                                                    Working...