As per some communication I've had with Shop Jimmy they must be getting more than a few requests for them. Admittedly a niche item but there you have it.
Attached Files
-
-
Re: SJ to Begin Stocking LED Strips
Yep it's becoming a real major problem. I keep LED strips after each teardown of a cracked screen set. They don't heatsink the LEDs properly.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: SJ to Begin Stocking LED Strips
So you think its heat, eh ? I was going to use thermal paste down the length of the bar when I reinstall it just in case...Comment
-
Re: SJ to Begin Stocking LED Strips
Two major things kill LEDs.
- Heat, lifetime approx halves for each 10°C rise in temperature.
- Mechanical mounting stress, flexing the diode.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: SJ to Begin Stocking LED Strips
And overvoltage from having a several in series short out ??Comment
-
Re: SJ to Begin Stocking LED Strips
That just causes heating leading to the typical failure mode.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
Comment