T-CON Check Spreadsheet

Collapse
X
Collapse
+ More Options
Latest Activity
 
  • Time
  • Show
Clear All
new posts

  • anmol
    replied
    Re: T-CON Check Spreadsheet

    Thanks tom66.

    usefull info.

    Regards

    Leave a comment:


  • tom66
    started a topic T-CON Check Spreadsheet

    T-CON Check Spreadsheet

    Attached is a little utility spreadsheet for inputting gamma voltages, VCOM, AVDD, VGH and VGL to see if your T-CON board is working for LCDs.

    Beta v0.01 may have bugs but please feel free to evaluate for testing purposes.

    Tested only in OO.org and Google Spreadsheet. Not fully tested in Excel -- appreciate any feedback on that.

    Enjoy
    Attached Files
    Last edited by tom66; 02-15-2014, 08:45 PM.

Related Topics

Collapse

  • Hakuu
    LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
    by Hakuu
    Hi There,

    This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

    After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

    More Details

    TV Model - LG OLED77G1PUA

    Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
    07-12-2023, 02:37 PM
  • maxim2511
    LG 55EC930V OLED - swich on swich of no screen
    by maxim2511
    My Oled Tv is 55inch tv, 3 days ago I notice that middle of the screen is getting warmer and on picture I have ghosting, missing red color. Color red was still displaying, but it was not so strong as corners of the screen and watching some movies makes me angry.
    Then I get an idea to take it apart and clean boards from dust.
    In side of Tv was not so bad, I take compressed air in can, and gently blow up.

    Also I was thinking to styrofoam sponge to isolate power board from screen that the middle of the screen will not worm so much. Because Led on screen when gets higher...
    05-14-2021, 02:21 AM
  • alltvrepairs
    Lg TCon test pins for screen test
    by alltvrepairs
    Hi,
    i have a 65 Panasonic TX-65HX710E using vestel 17MB170 main and Lg tcon.

    Few drops of water fell probably near COF and have no display. Tried removing tabs but no.part of display present as if tcon fuse open. However 12v is present and tcon can be felt warm enough that supplies are present. Backlight and sound ok.

    Anyone knows if this TCon 6870c-0805A has any special test pins for rgb test?

    Appreciate your help....
    06-13-2025, 06:33 AM
  • dreico33
    TL866 II Plus Check ID Error on various IC
    by dreico33
    Hellow guys , i really need your help here.

    Lately i have a problem with My TL 866 II Plus programmer, and to be more specific many times on various IC ( Winbond, Gigadevice Mx) i get Check ID Error while i am trying to read the IC. Has already been detected without any kind of problem, but the only to read them is to uncheck every time the "Check ID " option. After that i can read it erase it and re-program it only to get another error at then end saying that can not verify the programing went well so i have program failed. So i am trying to find out what is going on? I...
    11-04-2024, 03:13 PM
  • hasel17
    CH341a can erase and read but can't write and blank check
    by hasel17
    So I am trying to repair broken thunderbolt FW on X1 Yoga Gen 2. The EEPROM chip is WINBOND 25Q80DVNIG. I already do a back-up and erase. But when I try to wrote new FW, it was successfull, but when I tried to read it, it still blank. when I try to do a blank check, it gave me instant error in address 0. I already tried two CH341A, already did the 3.3v fix mod, using AsProgrammer, NeoProgrammer, Colibri, and CH341A 1.29. But the problem still occurred. What I did wrong here? Can anyone help me? Thanks in advance. Here is the log in Colibri :

    Code:
    Checking for blank...
    (Press
    ...
    10-26-2023, 06:20 AM
  • Loading...
  • No more items.
Working...