ue55d653owk

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sordids999
    Badcaps Legend
    • May 2013
    • 2149
    • uk

    #1

    ue55d653owk

    model number is ue55d653owk it's a samsung led, turns on fine but 3/4 of picture is funny colour very dark can't make picture out and the 1/4 that's left is fine?? Sound is all fine just the picture

    Any ideas ? it's not my tv a friends it's only 2 years old but I suspect panel again !
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: ue55d653owk

    Pic of TV?
    I am going to say bad panel is a possibility though wouldn't rule out an LED backlight fault.
    (sorry! I am sure you would like better news...)
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • sordids999
      Badcaps Legend
      • May 2013
      • 2149
      • uk

      #3
      Re: ue55d653owk

      im going over next week ill take some pics

      Comment

      • mmartell
        Badcaps Legend
        • Oct 2013
        • 3189
        • Canada

        #4
        Re: ue55d653owk

        Sort of like the inverse of this ? From an UN55D6000...
        Attached Files

        Comment

        • tibimakai
          Badcaps Legend
          • Jan 2012
          • 3680
          • USA

          #5
          Re: ue55d653owk

          D class is horrible.

          Comment

          Related Topics

          Collapse

          • Tr0ll
            T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
            by Tr0ll
            Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

            The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

            Original T-con:
            Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

            First replacement T-con:

            I thought it might be t-con and ordered new t-con from china(supposedly tested)...
            10-07-2023, 07:48 PM
          • TR103
            Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
            by TR103
            Hi, I have a Samsung UE50TU with:
            - sound and backlight, but no picture
            - when it arrived, it had a picture for a few seconds
            - it keeps rebooting
            - without ribbon cable between the two panel boards, it does not reboot but I have no picture
            - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
            - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

            - without cable between mainboard and lcd panel and with a jumpered...
            01-22-2025, 04:12 PM
          • Rayblaster
            HP RP7 RP7800 from 2012/2013 worst fault - has "character"
            by Rayblaster
            Hello friends, I've got a nice toy to play with - it is an HP RP7800 All-in-one POS system. I got it for free and it has one problem - it turns on very rarely, and just for a few seconds. After that it dies and doesn't come on if I don't leave it unplugged for at least 2 hours. I've repaired motherboards before, this is not my first one, but problem with these types of faults is that everything you check on the board will usually be fine. This is the case for me here.

            I dissassembled it completely, and got my hands on the motherboard. Model No. is PIQ67H/Higgins 11047-I 48.3GD02.011....
            12-30-2024, 06:28 PM
          • Gjackson
            50PUS7555/12 Backlight no picture
            by Gjackson
            Hi all,

            bit of a weird one today,
            Got this set with just backlight no picture, sound etc.. works fine so mainboard and PSU are likely good. I think it's a bad panel but don't know if it's fixable, here's why:

            T-CON voltages all present when both LCD ribbons are disconnected but if both are connected then most of the rails are gone (ex. VGH, VGL, HVDD)
            If only one of the ribbons is connected, I do get a hazy picture from the respective side but there is a loud hum coming from the T-CON board due to what I suspect is overcurrent and the circuitry that generates...
            11-04-2024, 02:48 PM
          • mecha1166
            KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen.
            by mecha1166
            KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen. Already tried reset POWER/VOL-. Anyone else have this problem? Possibly bad T-Con RUNTK4244ZZ or panel? Could main or power supply cause this? There were 2 blown 560u 35v on power going to backlights but they were still working fine. Thanks for your help.
            11-25-2024, 05:22 PM
          • Loading...
          • No more items.
          Working...