Panasonic TH-42PZ77U 7-Blinks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • canadaboy25
    What is normal?
    • May 2013
    • 509
    • Canada
    #1

    Panasonic TH-42PZ77U 7-Blinks

    Hello I have a Panasonif TH-42PZ77U plasma TV and it is giving the 7-blinks of death.

    When I disconnect the SU and SD boards I still get the 7 blinks and the TV won't turn on. When I dissconnect the SC board I get the same thing.

    Would this mean that either one of my logic boards are bad? If so is there any way that I can fix it?

    Thanks for any help.
    canadaboy25

    -Sometimes the light at the end of a tunnel is an on-coming train
    Tags: None
    • canadaboy25
      What is normal?
      • May 2013
      • 509
      • Canada
      #2
      Re: Panasonic TH-42PZ77U 7-Blinks

      I followed the attached troubleshooting guide and narrowed the problem down to my D-board.

      Is there any way I can fix this board?
      Attached Files

      if you find these attachements useful please consider making a small donation to the site

      canadaboy25

      -Sometimes the light at the end of a tunnel is an on-coming train

        Comment

        Previous template Next

        Related Topics

        Collapse
        • BigPete
          Panasonic Heatpump Dryer Repair
          by BigPete
          I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
          The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
          In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
          Unfortunately the whole machine has to come apart to fix it.
          I have...
          11-01-2025, 06:40 PM
        • Andre Gilbert
          Panasonic TC-P55ST50 8 blinks then no blinks
          by Andre Gilbert
          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

          TV Model: Panasonic TC-P55ST50
          ...
          1 Photo
          11-20-2024, 08:52 PM
        • AquaMan Ua
          Problem with PANASONIC CF53 laptop after changing BIOS settings
          by AquaMan Ua
          Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
          2
          2 Photos
          05-17-2025, 09:40 AM
        • MikeSantos
          Panasonic TX-P42VT30E 7 blinks of death
          by MikeSantos
          Hi,...

          I am just triying to fix this Panasonic. I will tell what I have done until now.

          I have checked the SN BOARD and I found some Transistors shorted and I changed them all.

          At the same time I saw that the PSU is also broken as it blows the T4AH250V FUSE. So I will have to change the 2 R6015ANX MOSFETs, so I need to buy them on internet because here I could not find them

          I am confused about fixing this Panasonic. What I know is that the SN BOARD is not in Shorted if I check the main source connector. I also checked all the connectors...
          01-21-2021, 12:42 PM
        • stecos
          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
          by stecos
          Hi everyone!
          I happened several times, in the search for help from the web, to consult this very interesting forum.
          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

          Having said that I come to the gist of my post on the forum as the title suggests.
          For my passion for technology I'm now collecting several...
          11-28-2022, 11:39 AM
        • Loading...
        • No more items.
        Working...