bh1u. 16a. 5 vdc. 16a250 vac. coil relay. where can i get 2 of these
-
-
Re: coil relay
Can you post a photo of this coil -
Re: coil relay
here is a pic of it on the boardAttached FilesComment
-
-
Re: coil relay
i believe the coil relay box is out. 1 or maybe both
the fuse will blow on the board as soon as i plug it in and there was no relay clickingComment
-
Re: coil relay
The photo the one of the relay you need to retake so I can see the writing
Also what device is this board in
Take another photo of the hole board more to the left this timeLast edited by sam_sam_sam; 01-19-2014, 09:19 PM.Comment
-
Re: coil relay
"the fuse will blow on the board as soon as i plug it in" you have shorted out components, not the relays. What did you check so far on the board?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: coil relay
replaced 6 caps 10v3300. this board is the sub board fo a
lg60pc1d-ue.Comment
-
Re: coil relay
whar happens when the coil goes out ?Comment
-
Re: coil relay
this will be as good as it gets ..my camera is broke and the picture is with a cell phoneAttached FilesComment
-
-
Re: coil relay
Look at both heat sink and see if you see a diode making on the components
also Google the part # as well see if any are shorted
The relay would not be your problem at this pointComment
-
Re: coil relay
i tested those already..all checked good...will re check againComment
-
Re: coil relay
didnt find anything shorted but when pluged in i can hear a real faint ticking sound
between the subpower supply and main powersupply
no standby light or relay clickingComment
-
Re: coil relay
the raint ticking sound...is that. from not getting the right voltage to make it power on?Attached FilesComment
-
-
Re: coil relay
what is the proper way to measure these.Attached FilesComment
-
-
Re: coil relay
"didnt find anything shorted but when pluged in i can hear a real faint ticking sound
between the subpower supply and main powersupply" So it is not blowing the fuse any more?
Ticking can mean the power supply is trying to start due to bad startup cap or it is in shut down-restart mode due to shorted circuit.
Pictures are not good enough to troubleshoot from remote.Last edited by budm; 01-21-2014, 07:23 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: coil relay
not blowing the fuse...gona try to replace the small capsComment
-
Re: coil relay
well the va at the conector at top of power board is up at 52...sticker calls for 60
the other readings are still low and im still trying to find why im not geting my start up?
i still have the verry faint ticking noise. still no stand by light.Comment
-
Re: coil relay
how do u measure the intergated circuit. it has 8 legs on it. and the other has 4Attached FilesComment
-
-
Re: coil relay
What are P/N as printed on the top? We need to look for spec sheet, then you will measure the resistance between the Ground pin against all other pins.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: coil relay
ka7552. rg52a. is the 8legs other is nec2571sk644. is the one with 4 legsComment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
I was working on this CNC machine today found no keyboard functioning no control relay powering on
The screen powered on and was giving an operation error but the manual was not very clear about what the error exactly was but with a little bit of troubleshooting and finding out that the control relays not powering on and no keyboard functions we narrowed down to this one switching power supply which of course does not have any indicator LED light they are on the keyboard interface/relay controller board
Found shorted diodes on main controller relays there are 3 of them that... -
Burco BCPLSAFWM5L 5 Litre Wall Mounted Automatic Water Boiler With Filtration UK 240v
Does anybody have any experience with these Burco units at all there is no record of them on the forum lol and a proper service manual would be nice. I invite you all to pesuade me not to botch repair it with a 5v relay, read on.
This unit was rescued from a skip 3 years ago, the only fault it had then was no backight display (plus it wanted a new probe set and top seal) but the screen was never an issue you can still see the screen as is and I just use it to get 5 Litres of very hot... -
Yesterday I successfully repaired a Middle Atlantic UPS2200R-IP that had inadvertently been used as a surge suppressor at our transmitter site. It has already been replaced with an updated one but it's coming home with me now instead of being e-cycled. To be specific, this is the MA model that has the blue backlit display and has been discontinued, although this design may have been used in many UPS units including the smaller Middle Atlantic ones in this series.
Here's what happened: We experienced a brownout/surge at the site, which damaged the UPS and took our broadcasting...
Comment