Announcement

Collapse
No announcement yet.

Vizio M60-C3 won’t stay on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vizio M60-C3 won’t stay on



    I have a vizio M60-C3 went to turn it on and as usual the logo pops up like normal then shuts off keeps doing it over and over. I would like to try and fix it myself if anyone has any suggestions thank

    #2
    Very common problem with main board. The cpu chip will probably need a reflow/reball. There is lots of data on the forum on how to do so. This is most likely your issue.

    Comment


      #3
      Should I just replace the main board?

      Comment


        #4
        It's generally pretty expensive to replace these because they are main thing that goes bad. Probably $150. It'd probably be cheaper just to buy a solder station with a hot air gun, and try to fix it yourself. Again this is likely the issue but not a guarantee without testing say the power board first. If you buy a new main board, remember that this new board will eventually have the same problem as well. Potentially anyway

        Comment


          #5
          Maybe contact Nick's tvs, see what he will charge you to fix your mainboard, hard to find anything here since this site changed up from the old/better layout but here's a post from him #6, maybe send him a pm: https://www.badcaps.net/forum/troubl...ent-backlights

          Comment

          Working...
          X