We have a 47" Vizio which will power on and give us sound (playing through a blu-ray hooked up via HDMI) but will not show any image.
Did the usual checking voltages coming into the main board from the power supply and it all checked out (5V & 12V but with the problem I am experiencing I didn't expect that would be the issue) not sure to go from here though.
There is no removable T-Con board with the ribbon cables attaching to a board directly on the top of the panel.
Any ideas would be appreciated, thanks for your help.
Did the usual checking voltages coming into the main board from the power supply and it all checked out (5V & 12V but with the problem I am experiencing I didn't expect that would be the issue) not sure to go from here though.
There is no removable T-Con board with the ribbon cables attaching to a board directly on the top of the panel.
Any ideas would be appreciated, thanks for your help.
Attached Files
Comment