LG 47LK520 won't turn on. Goes to standby.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • twelvetonine
    New Member
    • Oct 2013
    • 3
    • United States

    #1

    LG 47LK520 won't turn on. Goes to standby.

    I have a LG 47LK520 that was hit by a lightning storm and have been trying to repair it. When plugged in, the red light glows steady and when the power button is pressed the light pulses red every couple of seconds.

    Initially I bought a replacement power board thinking that would fix it but doing so didn't change anything. After some research I found out that the capacitors are often the problem however the capacitors on both my replacement board and the original board look fine. No bulges, no leaks, no busted tops.

    So after some more research I came across this link:http://blog.workingsi.com/2013/06/li...lw5700-tv.html
    and
    https://www.badcaps.net/forum/showthread.php?t=23798

    which had me pretty convinced that it was the main board.

    So I purchased a new main board form ebay, installed it and still no change, the TV was still going to the blinking red light mode. (I ended up returning the replacement mainboard I bought because, while it was the same model number, the heat sink didn't fit in the cover of my TV for some reason.)

    So, I'm kinda stuck on what to do next. I was thinking I should by another mainboard as the one I ordered on ebay may have been faulty. I'd really appreaciate any help I can get.

    Here are some pics of TV and components: http://imgur.com/a/3rRZn
  • twelvetonine
    New Member
    • Oct 2013
    • 3
    • United States

    #2
    Re: LG 47LK520 won't turn on. Goes to standby.

    Should I get a multimeter and start testing voltages? Is there a guide on how to do this?I'm by no means a noob when it comes to electronics I just would like to know what I'm doing.

    Comment

    • Larry_Ellison
      New Member
      • Sep 2014
      • 9
      • USA

      #3
      Re: LG 47LK520 won't turn on. Goes to standby.

      How did it go?

      Were you able to get the set back up and running?

      Comment

      • mneiland
        New Member
        • Oct 2016
        • 1
        • Canada

        #4
        Re: LG 47LK520 won't turn on. Goes to standby.

        Good question, I was having issues with min (green screen with sound when i turned it on..would last about 5min then normal.) Now it will turn on with no image but white flashing across the top of the screen, after about 10min it turns itself off...

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • boosti45
          Macbook pro logic board replacement parts quesion
          by boosti45
          i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180​" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?...
          08-21-2024, 05:23 AM
        • AleMonti
          LG 55EG910V - no power and no standby light
          by AleMonti
          Hi everyone,
          I'm trying to troubleshoot and repair this old LG OLED curved TV, model 55EG910V.
          I did some basic troubleshooting and reviewed most related posts here, but I wasn't able to isolate the issue.

          The TV shut itself off during playback and never came back to life - the standby light remains off. My dad claims that it has happened a few times in the past but the issue resolved itself after some time. Not this one.

          After checking the basics I did the following:
          • I measured all voltages and as expected the only active supply is the 3.5V standby. It
          ...
          11-04-2024, 05:02 PM
        • brzostos
          HP ENVY X360 15-EU0005NA 203037-2 does not turn on, something whistles on the board.
          by brzostos
          Hello, HP laptop model 15-EU0005NA. It does not turn on, 1 in 100 manages to turn it on then after a while it freezes/disappears/flashes, etc.

          After removing the motherboard and connecting the board with RAM to the power supply, I noticed that at first all voltages start correctly and after a few seconds 3.3V on the PL4501 coil disappears and somewhere in this area something starts beeping on the board, sometimes after touching it with a finger in the area of PL4551 it stops beeping and 3.3V appears again.

          Original HP 150W power supply, the diode in the power socket lights...
          10-01-2024, 01:34 AM
        • Loading...
        • No more items.
        Working...