hi guys got a Acoustic Solutions stuck in standby anyone had this problem before ?
thanks
thanks
Attached Files
-
-
Re: 42762hdf
ok update tv wont turn on so swopped another power unit i had but still the same no backlight or picture so disconnected the invertors one by one and the backlight tried to light up running off one invertor
so would u guys say its the invertors thats the problem ?
i know @tom has worked on this kind of tv -
Re: 42762hdf
I have not worked on this TV. I have worked on some Vestels, but not this model or chassis.
Probably not the inverter... how sure are you that your spare PSU is good? 90% of failures are due to poly caps on PSU board.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: 42762hdf
opps sorry tom my bad it was a different model i watched on your youtube videos
the power supply is 17pw16-2 i have a spare i removed from a working tv but still the same problemComment
-
Re: 42762hdf
Check the 24V supply to the inverters when both and when just one are connected.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Hi guys, I have a problem with my laptop which is MSI GF66-11UE. 3-4 days ago I wanted to change thermal paste,unfortunately one of screw was become stripped and I forced a little bit that screw.Anyways when I finished the change of thermal paste and picked up the laptop at last I realized that I didn't put the edp connector inside but the problem is I put this while the battery was still connected the motherboard.That caused a few sparks.
Fortunately, the laptop booted up afterward. However, it was running using the CPU's integrated graphics, and it didn't detect the dedicated... -
My main board is a 17MB12-2 and reads underneath that the following number 160807 LF,
Question is this board going to fit? ( see link) board is identical but from a different brand of tv but board number is same as in that it’s a 17mb12-2 board
Link to part here https://www.ebay.co.uk/itm/222990805243
This board is cheapest I can find. Also note:ordered one that was from a technica, an exact replacement, it arrived yesterday and when I fitted it it was a dead board, didn’t even show the standby light. When I piut the old board back in the tv worked but the issue... -
Hi everyone,
I'm working on a Dell G15 5515 (Ryzen 7 5800H, RTX 3050 Ti) and recently installed a compatible 4-zone RGB keyboard and controller (for Dell G15 5510/5511/5515 models). While the keyboard functions for typing, the RGB lighting is not detected by Alienware Command Center (AWCC), which displays “No AlienFX devices found.”
What I've Tried So Far:- Reseated the cables.
- Reinstalled AWCC and AlienFX services.
- Attempted BIOS downgrade but no improvement.
- Inspected ribbon cables for damage.
- Explored the possibility of BIOS or
10-19-2024, 01:34 AM -
hey guys I need a bios for 6-77-NP50PNJY-D02B-3C.With the current one, the laptop does not start. I am also attaching the original bios. Thank you!... -
Hi guys i have a Dell Inspiron 17 5767 with i7 processor and dedicated AMD Graphics.I got as a gift a good couple years now without a charger.It was dead and turned out to be a bad capacitor around the memory IC.Powered on and works.Fixed that issue years ago.But from since then was never able to get past the cannot determine charger message at bios.So i was more of a newbie then than i am now and before I thought the 3v came from the charging block and that only when the bios sees the correct charger then it will allow and send 3v..But turned out i was wrong.So over the course of time I bought...
Comment