hey guys I need a bios for 6-77-NP50PNJY-D02B-3C.With the current one, the laptop does not start. I am also attaching the original bios. Thank you!
-
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
I'm sorry I failed to provide all the details
The laptop is GIGABYTE G5 GE
S/N SN23011J002419
P/N 9RC55GE02EI501DE000Comment
-
-----------------------------------------------------
please support this forum
https://www.badcaps.net/donate/
-----------------------------------------------------Comment
-
I will try. Thank youComment
-
With your bios, it still doesn't start, but I noticed a change. When I press the Power button, the 5V voltage appears and the chipset in the processor heats up very little (I noticed this with the thermal camera). Unfortunately, I can no longer continue with this laptop because the client is leaving the country and cannot leave it. Thank you very much for your helpComment
-
hi guys i need bios for 6-77-NP50PNJY-D02B-3C My old bin power on but no display
s+n sn22451j001677
P+n 9rc55ge0fei101ee001
Model AX211NGW
G5 GE
OLD BIN
Comment
-
I installed it but after 3 hours it started and it blocked me. The more time I tried it, the more it showed up on the screen.Comment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Sorry for the long story. I have a Dell Latitude 5530 (i7) laptop (South Peak 15 MLK MB DDR4 203102-1 FK8VG$JA) with an admin BIOS password that I want to remove. Service Tag: HYKFPT3. Other than that the laptop worked OK.
I found a CH341A Black and went looking for the BIOS chip on the motherboard. After trying to read one chip that was a firmware chip but not the BIOS I think I found the BIOS chip labeled Winbond 25Q256JVEN. Altogether I think I found 4 different firmware chips in the laptop. The BIOS chip is a WSON8 6x8. I used the CH341A, NeoProgrammer, and a cheap pogo pin clip... -
Hello everyone!
I am looking for experienced BIOS modders who can help analyze or unlock the BIOS of my Acer Nitro Lite 16 NL16-71G.
Please note that this post was written with the help of ChatGPT because my English is limited. My native language is Russian. If anything is unclear, please let me know and I will do my best to explain.
--------------------------------------------------
Laptop Information
Model:
Acer Nitro Lite 16 NL16-71G
Motherboard:
CTE_NB_NL160P1G_RTH (NB6807C)
CPU:
Intel... -
Guys i have this MSI RTX4090 Gaming Trio that i want to flash bios. but there is only one bios ic and card have bios selection switch. as i know there must be two parts of bios in bios ic. Do u think that in Techpowerup database is correct dump with two fw in it? card is dead so i need to program bios in programmer. i have some experience that techpowerup bioses are not full dump of two fw in one chip. What do u think ?
Comment