Panasonic TH-42PX8E only relay click, no blinking

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #21
    Re: Panasonic TH-42PX8E only relay click, no blinking

    I mean with those connectors unplugged does the VSUS that you measured before (0.6V or so) increase to the rated 200V or so (voltage may vary slightly.)
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • schokobanane
        Member
        • Aug 2013
        • 13
        • Germany
        #22
        Re: Panasonic TH-42PX8E only relay click, no blinking

        it makes no big difference. if i measure between the one pin from P2 and also P11 and ground - i got 0,7 Volt in connected state and 1,0 Volt in disconnected state.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • SevenOFF
            Denon AVR-X4000 – Fast red blinking after 2nd relay
            by SevenOFF
            Hi everyone,

            I’m working on a Denon AVR-X4000 that goes into protection mode (fast red blinking LED) shortly after the second relay click.

            According to the service manual, a fast red blinking LED indicates a DC detection (DC_DET) or ASO (abnormal current) fault, meaning the unit is detecting a potentially dangerous condition on the power amp or power supply side.

            Here’s what I’ve done so far:
            • Fully opened and cleaned the unit (a lot of dust inside)
            • Removed and visually inspected the AMP board → nothing visibly damaged or burned
            • Testing is done with
            ...
            06-18-2025, 09:54 PM
          • riparo
            Panasonic Oled 55EZ950E, no picture, red led blinking every 4 sec
            by riparo
            Hi everyone, I have a Panasonic OLED TV model 55EZ950E, as soon as I turn it on I don't have any image the LED goes from green to red LED blinking every 4 sec, I found the service manual suggests checking OLED PANEL, PB BOARD, T-CON connectors but it seems like everything ok, I didn't find any burns under the pb board
            I attach a link to download the service manual, thank you for anyone who can help me
            https://tel-spb.ru/download/?brand=P...0E_LA73.rar​
            01-11-2024, 12:35 PM
          • SLB007
            Panasonic TX-32C300B stanbye light blinking 13 times
            by SLB007
            I get no image nor backlight, standby light blinks 13 times then stops. Any clues what it could be no evidence of damaged components
            11-02-2025, 04:08 PM
          • BigPete
            Panasonic Heatpump Dryer Repair
            by BigPete
            I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
            The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
            In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
            Unfortunately the whole machine has to come apart to fix it.
            I have...
            11-01-2025, 06:40 PM
          • CoinCoin88
            Panasonic PF50G20S blinking 13 times
            by CoinCoin88
            Hello there,

            Google led me again to badcaps when trying to troubleshoot a dying Plasma that is sitting at my uncle's roughly 550 km from where I am. It's an old G20 from 2010 or so, that isn't being actively used so you can consider the panel "not too sollicitated".

            Symptoms: TV starts, works for 5-10 minutes, then screen turns black and safety kicks in and spits a 13-blink code with the red LED. Once this code kicks in, the TV will not display any image anymore. Unplug it for a few minutes, plug it again, it'll work then fail a few minutes later.
            ...
            06-30-2023, 05:43 AM
          • Loading...
          • No more items.
          Working...