Re: Panasonic TH-42PX8E only relay click, no blinking
it makes no big difference. if i measure between the one pin from P2 and also P11 and ground - i got 0,7 Volt in connected state and 1,0 Volt in disconnected state.
schokobanane
Member
Last Activity: 08-06-2013, 03:14 PM
Joined: 08-04-2013
Location: Hamburg
-
Re: Panasonic TH-42PX8E only relay click, no blinking
Hi Tom, there is nothing to see on the SC and SS, also no display glimming. the only reaction are the relay clicks and the red standby LED without blinking. if i disconnect P6 from the A-Board i see the 10 times blinking of the standby LED.
On the power board itself are two LEDs? in the near of the relay - for what are these? I've never seen them lighting, should they?
What did you mean with VSUS, i've measured it on the connectors P2 and also P11, but i'll get only 1 V. did i misunderstood something?Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
ok, nothing happens if i disconnect these 2 connectors. i hope for Toms suggestions now..
Thank you anyway.Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
Hi tw2005, thanks for your support, should we continue with getting the panel runnig without the a-board?
I think Q406 wasn't the reason, the fuses wasn't blown and the symptoms are the same like before.
R411 seems ok, i got resistence from it.Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
i'm back again..Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
i hear one final click, but after 60 Seconds.
the relay, sounds like "tickeltick" after power on, it could also be a 3 times click for another ear.
please, could we continue tommorow? unfortunately it's very late here, so i need to go sleep for now.
many thanks for your support.Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
i hear two rapid clicks.Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
i get only 0,8 - 0,9 Volt on both connectors (P2 and P11)
it looks like that the value slowly increases.Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
i found vsus on the power board but im not sure on which point i could get it.Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
ok. yes, i have a multimeter, what should i do?Leave a comment:
-
Re: Panasonic TH-42PX8E only relay click, no blinking
Hi Tom, thank your for your response. i could not find D5 or A5, but P6, P7 and P25 (see attachment)...Leave a comment:
-
Panasonic TH-42PX8E only relay click, no blinking
Hi,
i got an Panasonic TH-42PX8E TV from a friend because its not working anymore, he told me that it already had a failure before, and he has given that device to an techican who only has replaced a fuse which worked for 2 months. (i could get no more specific information)
the TV has the following symptoms:
- i hear only one a triple relay click directly after power connection or powering off and on again via button
- the standby LED in the front lights red while on and does not blinking
- there is also no blinking LED on any Board
- the... -
Re: New Members - please post your introductions here
Hi everybody,
my Name is Danny from Hamburg, Germany. I'm an IT Technician an I found this interesting forum while searching for a solution to (self)repair my Panasonic Plasma..
Leave a comment:
No activity results to display
Leave a comment: