Panasonic TH-42PX8E only relay click, no blinking

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #21
    Re: Panasonic TH-42PX8E only relay click, no blinking

    I mean with those connectors unplugged does the VSUS that you measured before (0.6V or so) increase to the rated 200V or so (voltage may vary slightly.)
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • schokobanane
        Member
        • Aug 2013
        • 13
        • Germany
        #22
        Re: Panasonic TH-42PX8E only relay click, no blinking

        it makes no big difference. if i measure between the one pin from P2 and also P11 and ground - i got 0,7 Volt in connected state and 1,0 Volt in disconnected state.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • SevenOFF
            Denon AVR-X4000 – Fast red blinking after 2nd relay
            by SevenOFF
            Hi everyone,

            I’m working on a Denon AVR-X4000 that goes into protection mode (fast red blinking LED) shortly after the second relay click.

            According to the service manual, a fast red blinking LED indicates a DC detection (DC_DET) or ASO (abnormal current) fault, meaning the unit is detecting a potentially dangerous condition on the power amp or power supply side.

            Here’s what I’ve done so far:
            • Fully opened and cleaned the unit (a lot of dust inside)
            • Removed and visually inspected the AMP board → nothing visibly damaged or burned
            • Testing is done with
            ...
            06-18-2025, 09:54 PM
          • riparo
            Panasonic Oled 55EZ950E, no picture, red led blinking every 4 sec
            by riparo
            Hi everyone, I have a Panasonic OLED TV model 55EZ950E, as soon as I turn it on I don't have any image the LED goes from green to red LED blinking every 4 sec, I found the service manual suggests checking OLED PANEL, PB BOARD, T-CON connectors but it seems like everything ok, I didn't find any burns under the pb board
            I attach a link to download the service manual, thank you for anyone who can help me
            https://tel-spb.ru/download/?brand=P...0E_LA73.rar​
            01-11-2024, 12:35 PM
          • CoinCoin88
            Panasonic PF50G20S blinking 13 times
            by CoinCoin88
            Hello there,

            Google led me again to badcaps when trying to troubleshoot a dying Plasma that is sitting at my uncle's roughly 550 km from where I am. It's an old G20 from 2010 or so, that isn't being actively used so you can consider the panel "not too sollicitated".

            Symptoms: TV starts, works for 5-10 minutes, then screen turns black and safety kicks in and spits a 13-blink code with the red LED. Once this code kicks in, the TV will not display any image anymore. Unplug it for a few minutes, plug it again, it'll work then fail a few minutes later.
            ...
            06-30-2023, 05:43 AM
          • Andre Gilbert
            Panasonic TC-P55ST50 8 blinks then no blinks
            by Andre Gilbert
            Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
            Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

            TV Model: Panasonic TC-P55ST50
            ...
            1 Photo
            11-20-2024, 08:52 PM
          • valvashon
            Repair Success! Middle Atlantic UPS2200R-IP
            by valvashon
            Yesterday I successfully repaired a Middle Atlantic UPS2200R-IP that had inadvertently been used as a surge suppressor at our transmitter site. It has already been replaced with an updated one but it's coming home with me now instead of being e-cycled. To be specific, this is the MA model that has the blue backlit display and has been discontinued, although this design may have been used in many UPS units including the smaller Middle Atlantic ones in this series.



            Here's what happened: We experienced a brownout/surge at the site, which damaged the UPS and took our broadcasting...
            02-06-2024, 12:54 PM
          • Loading...
          • No more items.
          Working...