I have an Emerson LC320EM2 that will not power up. No LED or anything.
I purchased a power supply replacement kit that had a resistor, 2 diodes, a mosfet and a transistor.
The problem I found was that Diode D607 was shorted and when I would replace it, it would keep shorting.
the kit I used included:
D607, D610, D604, D640, Q601, Q600, and R608.
After replacing all these parts, I am still having no power, no LED.
Also D607 and D610 are shorted again.
Has anyone seen this before or have any suggestions?
Thanks in advance for any help.
I purchased a power supply replacement kit that had a resistor, 2 diodes, a mosfet and a transistor.
The problem I found was that Diode D607 was shorted and when I would replace it, it would keep shorting.
the kit I used included:
D607, D610, D604, D640, Q601, Q600, and R608.
After replacing all these parts, I am still having no power, no LED.
Also D607 and D610 are shorted again.
Has anyone seen this before or have any suggestions?
Thanks in advance for any help.
Comment