Re: Emerson LC320EM2 not powering up



On my model R605 & R606 were both 120 ohms.
Since D640 appears to be the cause of all the other components going bad I decided to use a schottky diode with greater current capacity to avoid another failure. Digikey had one that handles 5 amps rather than 2. Their part number is SB5100DICT-ND.
This is a through hole diode so I carefully drilled a couple holes through the circuit board and installed it from the top. So far so good....

Re: Need help with a Emerson 32" TV LC320EM2F

The schematic I have only has a part number for D611 which is 12B220-YBB. I'm guessing it's a 220 volt zener based on the numbers it has.