Panasonic Viera TC-P50G10 7 Blinking Red

[tom66]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

The 5V doesn't go no where. It goes to a net marked "5V". They just didn't draw the net in. Common in electronics design. Looks like you have semi-original Panasonic engineering documents, before they were cleaned up to look nicer for the service manuals.

[tw2005]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

Yeah I stumbled across it searching parts. Looks more like an original engineering drawing.

It's been extremely useful in decoding a lot of the part numbers as they have used the same parts through a number of generations and they list both the panasonic and oem part # together which they do not in the service manuals.

[tom66]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

Can you upload that here so I can post it on the service manuals site?

[tw2005]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

Can you upload that here so I can post it on the service manuals site?

Sure thing buddy

[tom66]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

PX10: That's like one of the first generation of Panasonic PDPs? (2001 era)

Panasonic were the first to demonstrate a viable large-screen PDP (read up on PlasmaCo, who Panasonic purchased), though they were beaten to commercialisation by 2 years by Fujitsu.

[tw2005]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

No I've misnamed it, move the P. TH-P42X10 , SC TNPA4773 and the SS is TNPA4774.

2009 model I believe

[tom66]

Re: Panasonic Viera TC-P50G10 7 Blinking Red

Ah, well that puts it 8 years ahead of when I thought it was made... lol...

I do have a 2001 document from Panasonic describing how a PDP works.


but most of my other stuff is 2005 onwards.