Wharfedale LTF37K1CB Picture problem

[multimeter]

Re: Wharfedale LTF37K1CB Picture problem

Ok tested again. with no power to the TV and with the plug at the power supply to the inverter unplugged. All 5 red pins have no movement on the meter, it stays showing 1__._ (the _ indicates no number)

great,no shorts then !i would replace the output caps on the power supply and see how we go from there.



by the way do you have an ESR meter?

[Smokin House]

Re: Wharfedale LTF37K1CB Picture problem

Sorry no

[multimeter]

Re: Wharfedale LTF37K1CB Picture problem

Sorry no

direct replace those caps then

[Smokin House]

Re: Wharfedale LTF37K1CB Picture problem

OK. Thank you for all your help Multimeter (",)

I will post back once I have got those 2 caps sorted and let you know how it goes

[Smokin House]

Re: Wharfedale LTF37K1CB Picture problem

Hi all,

Well I finally managed to get those 2 Panasonic caps (what a pain that was getting only 2 and cheap - ended up paying £3.78 for the pair, even though I had found them elsewhere for about 50p each) and replaced them today. TV's been on for an hour with no drop out and have turned it on/off/on/off/on/off a few times and starts first time every time and stays on every time (not like before)

So THANK YOU to EVERYONE that helped me out and I will certainly return for any future help I may need.

Also if anyone ever needs help with iPhones please PM me