Rca 32inch l32wd22 no power up no inverter light.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #21
    Re: Rca 32inch l32wd22 no power up no inverter light.

    OK, I trace out the connection, that pin is the PS_ON pin. Monitor the DC voltage on the pin when TV is off and when power switch is activated, black probe on the chassis, then report the readings.
    The PS_ON (around 3VDC if it is Active High, or goes low if it is active LO) is fed through R959 to the Base of Q904 to turn the PFC and the 24V power supply on, the PS_ON voltage should change state when TV is turn on and off.
    Attached Files
    Last edited by budm; 05-03-2013, 09:54 PM.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • snake91876
      Badcaps Veteran
      • Feb 2013
      • 236
      • United States

      #22
      Re: Rca 32inch l32wd22 no power up no inverter light.

      I have no voltage on that pin with tv off or pressing on button.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #23
        Re: Rca 32inch l32wd22 no power up no inverter light.

        OK, so since there is a resistor in series with the base, unplug the connector from the main board side, take a piece of wire (safe due to resistor built into board) and jumper it between PSON and 5V standby. Do you see 24V output and ~390V on the big capacitor?
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • snake91876
          Badcaps Veteran
          • Feb 2013
          • 236
          • United States

          #24
          Re: Rca 32inch l32wd22 no power up no inverter light.

          I unplugged the main board plug off ps and jumped out 5v and pson pin
          and i get 375v on the big capacitors but still nothing on inverter
          Plug pins, no 24v but i han main board unplugged is that correct.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #25
            Re: Rca 32inch l32wd22 no power up no inverter light.

            That's correct. Looks like you may have bad PSU and bad main board. Perhaps a mains surge took out both.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • snake91876
              Badcaps Veteran
              • Feb 2013
              • 236
              • United States

              #26
              Re: Rca 32inch l32wd22 no power up no inverter light.

              I paid $10 for this one guess i let it go to the trash.

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #27
                Re: Rca 32inch l32wd22 no power up no inverter light.

                I wouldn't be that quick to throw it in the trash, it's probably repairable, but you'll need to trace down the fault in both parts.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • infringer
                  Badcaps Member
                  • Sep 2009
                  • 244
                  • United Frickin States

                  #28
                  Re: Rca 32inch l32wd22 no power up no inverter light.

                  Damn bummer I have a similar problem...

                  https://www.badcaps.net/forum/showth...332#post556332

                  would have been nice if the user followed through!
                  Please note: I am not responsible for any harm caused to you anything discussed is just discussion. Before you try anything discussed be sure that you have the appropriate knowledge and safety gear for the job. Like with anything education and safety are first! Do not try anything @ home without it.

                  Comment

                  Related Topics

                  Collapse

                  • m1ch43lzm
                    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                    by m1ch43lzm
                    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                    05-12-2025, 08:37 PM
                  • howardc64
                    A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                    by howardc64
                    Problem

                    This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                    08-04-2024, 10:36 PM
                  • lostone
                    Looking for help with a Viewsonic VP230mb where the backlight comes on only momentarily
                    by lostone
                    Hello, I came here after finding some similar questions asked on other monitors and hope someone here can help me get an ancient Viewsonic VP230mp (23" 4:3 LCD) back to working condition.

                    First a little background, I have a background in computer and electrical engineering, and I'm smart enough to know I know nothing about LCD displays and how they work. For this topic I'm as green as they come.
                    When the display is turned on the viewsonic logo displays in the uppper left for 2 seconds then the screen goes black, the power LED is green (on) and when a computer is connected...
                    05-19-2024, 11:40 AM
                  • howardc64
                    TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                    by howardc64
                    All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                    • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                    • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                    ...
                    07-24-2025, 05:17 PM
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    11-22-2024, 01:46 PM
                  • Loading...
                  • No more items.
                  Working...