I have no power up and inverter board not lighting. TV has power through wires going to main board I have correct voltages. I don't have the 24 v on the plug going from PS to inverter board. Any ideas.
-
-
Re: Rca 32inch l32wd22 no power up no inverter light.
You need to verify if the inverter board is getting the bl_on signal (>3vdc).
Read basic troubleshooting guide at the link below.
Upload good clear pictures of the board using attachment function.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: Rca 32inch l32wd22 no power up no inverter light.
Cant get the troublshooting guide open,
I have no voltage on the b on plug on the main board and
no voltge coming from ps to inverter boardComment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Do you have 5V, 12V, PSON? Pictures of chassis?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Hard to help without seeing the pictures of what we are trying to fix.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Here is pic of ps and main board my pwer supwply has voltage on the left hand plug going to motherboard but none on plug going to inverter think it sau
ys 24v. what do u think.Attached FilesComment
-
-
Re: Rca 32inch l32wd22 no power up no inverter light.
You think you saw 24V? Go back and check for sure. We do not want to follow a wild goose...Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
No i have no voltage on plug going to inverter i think it saya one wire should be 24v. also i get no click or anything when it turns on but i have three wires with voltge on left plug of powersupply.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Do you have 5V standby power?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
If you check the voltage at the two pins of the large black filter caps (rated at 450VDC) when TV is plugged in but not turn on, it should have about 160VDC on the legs, when you turn on the TV, the voltage should go up to around 380VDC, if it does then the PS_ON signal is good. Br careful since you are working in the HOT side of the circuits, do not touch any part of that section with your hands.
Please make sure your pictures are in focus, it is hard to troubleshoot the boards with bad pictures.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
On left side power supply plug i have 14.8., 12v, and 5vComment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
So you have 15V, 12V, 5V, but no 24V? That does not sound right at all... Unless that main transformer is for 24V and nothing else, that's possible I suppose.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Yeah there are two big plugs on power supply and the one on left which runs to main board i have 15, 12, and 5 volts. the plug on right is the one to inverter board and it has 0 voltage on all pins.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Can we see a pic of bottom of the PSU?
Also do Budm's suggested check of the big cap voltage.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Both big caps have 165v with meter on 400dcv. i am uploading additional pictures now.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
This suggests PSON is not changing or there is a fault with the control portion of the PSU.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
what would be the control portionComment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Don't know yet, things like optocouplers for passing the signal across, to be honest, quite rare compared to PSON/main board fault.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Rca 32inch l32wd22 no power up no inverter light.
Here is better pics of bottom of PS and pictures of the top .Attached FilesComment
-
-
Re: Rca 32inch l32wd22 no power up no inverter light.
All right i have double checked i got 5, 12, 14.9 v on power supply, i got
5v standby , 12v, at main board, but when i press the power on i hear nothing and the voltage on the plug to invertor board is non existent. Could i have a main board problem instead of power supply issue.Comment
-
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hello, I came here after finding some similar questions asked on other monitors and hope someone here can help me get an ancient Viewsonic VP230mp (23" 4:3 LCD) back to working condition.
First a little background, I have a background in computer and electrical engineering, and I'm smart enough to know I know nothing about LCD displays and how they work. For this topic I'm as green as they come.
When the display is turned on the viewsonic logo displays in the uppper left for 2 seconds then the screen goes black, the power LED is green (on) and when a computer is connected... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
Comment