NEC 42" problem plasmasync 42mp1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • henrysin44
    Senior Member
    • Apr 2013
    • 109
    • United States

    #1

    NEC 42" problem plasmasync 42mp1

    I have a nec px-42vm1a that has no picture, when I turned it on there was a red bar across the screen and then it turned off as I heard a pop, tv has worked before.
    I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

    Service Menu/Factory Reset Codes for TVs
    http://www.badcaps.net/forum/showthread.php?t=24809
  • henrysin44
    Senior Member
    • Apr 2013
    • 109
    • United States

    #2
    Re: NEC 42" problem plasmasync 42mp1

    kinda urgent
    I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

    Service Menu/Factory Reset Codes for TVs
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: NEC 42" problem plasmasync 42mp1

      Sounds like a Y-buffer issue. Did the bar go from top to bottom or left to right?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • henrysin44
        Senior Member
        • Apr 2013
        • 109
        • United States

        #4
        Re: NEC 42" problem plasmasync 42mp1

        Left to right, I too collect flat screens from the dump but this one is my grand dads
        I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

        Service Menu/Factory Reset Codes for TVs
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: NEC 42" problem plasmasync 42mp1

          Can we see a picture?
          That extra message below "_________" is part of my signature, automatically added to the first post of mine on each page.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • henrysin44
            Senior Member
            • Apr 2013
            • 109
            • United States

            #6
            Re: NEC 42" problem plasmasync 42mp1

            What do you want a picture of
            I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

            Service Menu/Factory Reset Codes for TVs
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: NEC 42" problem plasmasync 42mp1

              The fault.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • henrysin44
                Senior Member
                • Apr 2013
                • 109
                • United States

                #8
                Re: NEC 42" problem plasmasync 42mp1

                Well theres no picture on the screen (black) and no visible faults on any of the boards, all I currently have as a iPad with no camera.
                I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

                Service Menu/Factory Reset Codes for TVs
                http://www.badcaps.net/forum/showthread.php?t=24809

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: NEC 42" problem plasmasync 42mp1

                  There was a red bar though? Is that gone now?
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • henrysin44
                    Senior Member
                    • Apr 2013
                    • 109
                    • United States

                    #10
                    Re: NEC 42" problem plasmasync 42mp1

                    Yes, I turned the nec on and a red bar went across the screen, I then heard a pop noise. The set will turn on, the fans will spin up with a green indicator light then the fans spin down and the light turns red. With no picture on screen.
                    I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

                    Service Menu/Factory Reset Codes for TVs
                    http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: NEC 42" problem plasmasync 42mp1

                      The symptoms don't match up. It's pretty much impossible to have a left to right horizontal bar; due to how the pixels are arranged. There's a small chance it's the main board, but it's more likely a sustain board and buffer failure, which would lead to top to bottom vertical bar(s).
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • henrysin44
                        Senior Member
                        • Apr 2013
                        • 109
                        • United States

                        #12
                        Re: NEC 42" problem plasmasync 42mp1

                        Oh there was also a top to bottom one too, forgot to mention that.
                        I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

                        Service Menu/Factory Reset Codes for TVs
                        http://www.badcaps.net/forum/showthread.php?t=24809

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: NEC 42" problem plasmasync 42mp1

                          You really need to mention all of the symptoms but it still doesn't make sense. Pixels are arranged "RGB", left to right. You can get all "R" stuck on in one vertical bar, more than possible. You can't really have all "R" in a horizontal bar stuck unless the main board is at fault (you might get all RGB, i.e. white, but not just red), but this doesn't really correlate with the "pop" you heard. So I don't know what to say.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • henrysin44
                            Senior Member
                            • Apr 2013
                            • 109
                            • United States

                            #14
                            Re: NEC 42" problem plasmasync 42mp1

                            Well it happened, oh well.
                            I have salvaged and fixed 18 TVs (1 DLP), 22 LCD monitors, 8 stereos, network stuff, and more laptops and computers than i can count.

                            Service Menu/Factory Reset Codes for TVs
                            http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            Related Topics

                            Collapse

                            • perzyk23
                              Lenovo T580 - LCD Panel problem - error 0288
                              by perzyk23
                              Good morning,
                              I have a problem with Lenovo T580, which after error code 0288 suggests a problem with the display. I checked the display and it works on another laptop. I replaced the display cable with a new one. I programmed another BIOS (downloaded from this forum) and I still have the problem of a dead display - there is an image via HDMI, and the system does not detect the built-in LCD at all. The problem appears to be hardware. What can I check to confirm or disprove this? I found many threads on the Internet related to this problem 0288, but without specific solutions. Please advise....
                              10-25-2024, 12:42 AM
                            • SDNarcia
                              Dell 15R-5521 keyboard problem (KBC?)
                              by SDNarcia
                              Hello, I have a Dell 15R-5521, with the problem that the Ctrl, Alt, Shitf and Num Lock keys do not work, I tested the keyboard with a keyboard tester and it is functional, I also got another new keyboard and the computer has the same problem with the same keys. Check continuity between the ZIF connector from the keyboard to the KBC and all pins are correct. I cleaned the ZIF connector and the KBC and I still have the same problem. I reinstalled windows just in case, and it didn't work. I updated the BIOS to the latest version A16 and there were no changes.

                              As additional information,...
                              07-20-2024, 10:47 PM
                            • funyy
                              LG OLED55B8PLA problem
                              by funyy
                              Hey there,
                              So I got a problem with my LG OLED TV (OLED55B8PLA).

                              the problem is that the tv won‘t power on some times, the led stays red and won‘t even blink, just solid red when I try to turn it on. USB devices connected won‘t light up. 1/4 of the screen (left side) shows some green „clouds“ that are getting brighter everytime I turn the tv on and after some tries the tv finally turns on. Sometimes it takes 10 tries and some times 100 or even more tries.

                              When the tv is on, everything works fine, hdmi outputs, usb inputs, wifi, bluetooth, etc is working...
                              04-30-2022, 07:51 AM
                            • Xristakis795
                              GA-P35-S3 gigabyte motherboard problem after upgrade
                              by Xristakis795
                              hi to all
                              I have the above motherboard on which I had windows xp I upgraded it to windows 10 everything went well just when it rebooted and got updates i saw a message for a very short time that windows is trying to fix a problem they found and then the problem was overcome and all is well
                              the computer works normally without any problems on the internet and in everything
                              but I found out unfortunately when I had completely cut off the power supply from the network and I went the next morning and plugged it in to turn it on when it went to boot a black screen and the cpu was working...
                              12-28-2021, 06:24 AM
                            • falcontech
                              MOTU TRAVELER MK3 AUDIO PROBLEM
                              by falcontech
                              Good Afternoon
                              I have a problem with this MOTU audio card, a traveler MK3, the connection to the computer is via firewire, the card is recognized by the computer (both mac and win) but I have no audio output, on the front there are a series of LEDs including the clock (44.1, 48, etc.) and that LED at the time of connection usually remains fixed telling me the clock frequency set on the computer, now at every start the LED in question remains flashing in most cases, sometimes it becomes fixed, other times it disappears, without any sign of operation, I exclude problems with the firewire chip,...
                              01-24-2025, 08:47 AM
                            • Loading...
                            • No more items.
                            Working...