so i picked up this used samsung ln-t4661f that didnt power up low and behold 3 bad caps i changed them and tv turns on works great except i find it a bit greenish in colour even using all the features on the menu it still weird in colour now could it be the ribbon cable not connecteing properly or is it the t-con board now can i reflow a t-con board or is it best to buy a new one
ok need help with samsung 46 inch lcd tv colour issue
Collapse
X
-
Re: ok need help with samsung 46 inch lcd tv colour issue
Can we see a picture of the effect?
It is possible to adjust precise colour balance factors in the service menu, as well as performing a complete reset.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: ok need help with samsung 46 inch lcd tv colour issue
here's the video i posted on youtube so tom how do i do a complete reset is there a button for it somewhere??
http://www.youtube.com/watch?v=xp1uapJuEiYComment
-
Re: ok need help with samsung 46 inch lcd tv colour issue
also i changed 3 capacitors on them the original ones were valued at 2 was 1000uf 10v and the other one was 1000uf 25v i changed the two with 1000uf 16v and the other one i did 1000uf 35v should they all have been rated at 1000uf 35v ???Comment
-
Re: ok need help with samsung 46 inch lcd tv colour issue
The panel is defective due to bad tab bonds, most likely.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: ok need help with samsung 46 inch lcd tv colour issue
Not always, panel defects can be regional or global.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: ok need help with samsung 46 inch lcd tv colour issue
https://www.youtube.com/watch?v=purk_SyiT44 found from toms posts
good video shows how to fix tab bond issuesComment
-
Re: ok need help with samsung 46 inch lcd tv colour issue
Inverter for sure is not,because when you have it on the static screen it stays on.
I had a Toshiba 42" that initially it had a perfect screen and suddenly it would freeze and black out the whole screen. It's not the same symptom, but it's similar and for me, another T-con board fixed the problem.
You should remove the plastic bezel, remove the metal LCD case and touch all the tabs, to see if anything changes.Comment
Related Topics
Collapse
-
by vincentedelHello,
I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some time—like after playing a game—the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.
I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...-
Channel: Troubleshooting Computer Displays
-
-
by gsmith413Hi Respected forum members,
I have trying to resolve a Samsung TV MODEL-UA40K5000ARLXL multiple issue since last 1.5 months, but now i am stuck having tried almost everything as per my limited knowledge, and hence I seek you support.
Issue : The TV turned off automatically one day.
No Backlight ,No image on screen(flashlight test done),no standby
Samsung repair technician could not find the fault and asked to replace the PSU board, which my ego did not agree with
The Board is L40MSFN-FHS BN44-00851B.
I have searched the whole internet... -
by ManucslHello.
My TV is a QE65Q800TATXXC Samsung TV.
Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
Any ideas to check would be very appreciated 😊
After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
by FourRunnerI purchased a used Samsung TV model UA65JS9000W recently knowing it had an issue with the screen. When switched on the picture was bright both sides of the screen but a little darker in the middle of the screen. Thinking this was the back lights (side mounted LCD strips) I replaced these, however the issue is still there. I am now thinking it may be a TCOM issue, but am not sure, any advice on this would be appreciated. Also whilst changing out the back lights I noticed the the thick clear plastic sheet (maybe 1.5 to 2mm thick) below the diffusers there is cracking (up to 75mm) on the sides and...1 Photo
- Loading...
- No more items.
Comment