QE65Q800TATXXC Samsung TV Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Manucsl
    New Member
    • Feb 2025
    • 5
    • France

    #1

    QE65Q800TATXXC Samsung TV Issue

    Hello.

    My TV is a QE65Q800TATXXC Samsung TV.

    Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
    Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
    Any ideas to check would be very appreciated 😊

    After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump it.
    Is there someone here who can upload the eeprom for this motherboard ??
    Thank you for your help.
    Manu

    BN41-02752A MAIN AV BOARD BN41-02752A (BN94-00038G) - SAMSUNG
    BN44-01068A LED DRIVER BOARD
    BN95-06565A T-CON
    BN44-01073A Power board
  • Manucsl
    New Member
    • Feb 2025
    • 5
    • France

    #2
    Hello again.

    I've post a dump of my eprom in the channel for that purpose.
    If you can help me, I would really aprreciate.
    Thank you so much.
    Manu

    Comment

    Related Topics

    Collapse

    • ohren
      Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
      by ohren
      I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

      I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

      The models launched in 2018 and 2019 respectively....
      09-08-2023, 05:24 PM
    • C152Heavy
      Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
      by C152Heavy
      Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

      Summary for TL-DR readers:
      • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
      • Have obtained Samsung schematic & service documents - Can upload if helpful.
      • Have read ALL applicable threads
      • C1818 and CP820 replaced as low hanging fruit
      • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
      • VCC pin (18) of PFC...
      01-11-2023, 02:53 PM
    • alltvrepairs
      Samsung UE65RU7090UXZT main board issue no video out. BN94-14180M
      by alltvrepairs
      Hi,

      I have confirmed that I have a mainboard problem.
      I have tracked no hardware issued on board so might be a software dump required.

      I have searched a bit but wasn't able to find anything for my screen:

      Here are some more details:
      Panel: cy-nn065hgev1h
      Main: BN94-14180M P08F

      Your help much appreciated!

      ​








      ...
      05-16-2025, 03:03 AM
    • Document Archive
      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-07-2024, 05:50 AM
    • Nicktronic
      Samsung Power Supply Board BN44-00874F
      by Nicktronic
      Hey everyone,

      This power supply board is hard to find but there are repair kits available. This board had a blown fuse, FP801S, blown PFC MOSFET, QP802CS and ceramic cap, CP809. I replaced them with parts I already had and tested the rest of the parts that would've come in the repair kit and they were fine. I powered the board up on the bench expecting, in typical Samsung power supply board fashion, to see all my output voltages but, nothing. 0 volts on CNL801, CNM801 and CNT801. The only thing I have is 170vdc on the filter caps. No standby voltage either.

      Anybody...
      03-17-2025, 06:20 AM
    • Loading...
    • No more items.
    Working...