Can anyoone help me, this tv is complete dead.
samsung ln46a540p2fxza no power
Collapse
X
-
Re: samsung ln46a540p2fxza no power
You've abandoned at least two repairs in your last posts. We like to actually fix stuff, not waste time. It's very frustrating when no reply come back.
How about some pictures? You've been here how long, and no pictures? No list of what you've tested already? Have you owned the set since new or ...?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: samsung ln46a540p2fxza no power
tom66: i try two set, the sanyo wish i burn the power supply, i replay the i was jus goint to buy the power supply and the samsung wish they replaay and toll me that the screen was bad. i finish with both thread. Belive me i want to fix them too and i really apreciate your help.
this tv i tested the standby and there is no power. Pls. remember, iam trying to learn. I really want to learn.Comment
-
Re: samsung ln46a540p2fxza no power
tom66: i hope you reconsider helping me, i am learning the system. i never try to be unconsider but sometime you wait for hrs for answer, so o has to go and do other stuff. plus i don't know the hr. diferent. just asking for a little patient. thank youComment
-
Re: samsung ln46a540p2fxza no power
Leave the TV unplugged, disconnect the large cable between the Main board and the power supply board, plug the TV in, the backlights should come on right away.
What is the P/N on the power supply-inverter board? BN44-???????Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: samsung ln46a540p2fxza no power
You have power supply/inverter board combo, the two boards on the side are balancer boards with lamp current sensing transformers for each lamp. To verify if you have power supply-inverter board problem or the main board problem, you have to disconnect the cable as I suggested in post 6, if it does not stay on, then you have power supply-inverter board or one of the lamp draws too much current, you must follow my suggestion on post 6.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: samsung ln46a540p2fxza no power
If the backligts do not turn on the minute you plug the TV to the outlet with the large cable between the main and the power supply board disconnected, then you have bad power supply-inverter board or lamp over current problem.Last edited by budm; 01-12-2013, 11:59 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: samsung ln46a540p2fxza no power
Very difficult. You had another SAMSUNG with same problem too right?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: samsung ln46a540p2fxza no power
This is one looks like your board:
http://www.shopjimmy.com/samsung-bn4...wer-supply.htm
BN44-00202A
Thanks to TOM66, he has the diagram for the board.
And this is how to test to find out if the lamp is bad.
https://www.youtube.com/watch?v=oE6K4xBVweAAttached FilesNever stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: samsung ln46a540p2fxza no power
This is one looks like your board:
http://www.shopjimmy.com/samsung-bn4...wer-supply.htm
BN44-00202A
Thanks to TOM66, he has the diagram for the board.
And this is how to test to find out if the lamp is bad.
https://www.youtube.com/watch?v=oE6K4xBVweAComment
-
Re: samsung ln46a540p2fxza no power
Ok. I tested the power on and the 5.v on j850 and i am getting power,sudenlly i hear the samsung music and i can see in the back of the screen that it on. I get no picture. I turn it off and now went i turn it on it start clicking trying to turn on. My question, tom66 show me how to jump it getting power from any other source, Can i do the same thing here?Comment
-
Re: samsung ln46a540p2fxza no power
Hi.. I am sorry to post here my ask, I don´t know the better place to do it.
I am Brazilian and need to Know more about free sites of schematics and Manuals because in my country it is very difficult to find.
if can you help me I will be thanks
I already found some sites: EletroTania, tgohome.eletronica Duartes.Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by PantherDaveHi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... -
by GLISITHi all,
TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!
I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!
A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about... -
by mrtekHi
Picked up another TV. Samsung UN43NU6950FXZA. No power and no standBy led on. Removed back cover and:
Main fuse = OK
Back light LED = OK. Power them with aux power source
LED output = OK 156V
I do get 12 V DC out of the power supply going to the digital section but no 5V or 3.3V. PS_on voltage is only 1.8V. I have looked everywhere on the PCB , I could not find i reference for 5V output.
Also removed connections to panel, speakers and remote but no luck. One strange thing is that even with the LED power supply working, backlight LED do not turn on... -
by hill01Samsung UE75MU7009TXZG Endless Power Cycle
Hi everyone and thanks in advance for any help I might get here
My Samsung TV is about 4 years old. The exact model number is UE75MU7009TXZG.
About half a year ago I started seeing occasional green frames pop up while watching movies. I mean literally green frames. Not the image turning green, but the entire screen turning green for a split second. This happened maybe once or twice during a 2 hour movie. So no big deal, but clearly something was not quite right.
Since a few days, the TV won't turn... - Loading...
- No more items.
Comment