Sharp aqous lc-37xd1e

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ecosse2253
    New Member
    • Jan 2013
    • 8
    • N.ireland

    #1

    Sharp aqous lc-37xd1e

    Hi guys new to the forum and wondering if yous's could help received. The above tv today plugged it in in get the red light try to turn the tv on and get a quick flash of green accompanied by a click from the relay then back to red then nothing all caps are flat throughout the tv.
    Any help would be appreciated.
  • Ecosse2253
    New Member
    • Jan 2013
    • 8
    • N.ireland

    #2
    Re: Sharp aqous lc-37xd1e

    Anybody got any ideas help would be much appreciated

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #3
      Re: Sharp aqous lc-37xd1e

      We need good clear pictures of the back side of the TV so we can see how all the boards are connected together at least.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Ecosse2253
        New Member
        • Jan 2013
        • 8
        • N.ireland

        #4
        Re: Sharp aqous lc-37xd1e

        Just found out the voltage for the av is 4volts down I have 26 instead of 30volts stated on the schematic would this cause the tv not to come out of standby
        Will try and put up pictures tomorrow evening

        Comment

        Related Topics

        Collapse

        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • sefoster
          Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
          by sefoster
          I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
          11-20-2022, 09:29 AM
        • gavenb
          Sharp LC-80LE661U 80 inch
          by gavenb
          Hi folks!
          I have a LC-80LE661U that had some interesting issues.
          Initially, it would come on and show the sharp logo and would show normal static before shutting off.

          I started troubleshooting by disconnecting the led lighting strips and turning it on. It would do the same thing - come on, show the sharp logo and shut off. After reading, it was suggested to replace the main board. That was replaced and the same symptoms resulted. After this and some reading, the parts cannon got loaded up. I replaced the power board, same issue. Replaced the Tcon board and now it...
          11-12-2023, 02:05 PM
        • betmen
          TV Sharp LC-49CFE6242E - not working
          by betmen
          Hello,
          I get one old TV, Sharp LC-49CFE6242E which is not working.
          When turning on the TV, the inscription SHARP is displayed on the screen and after a few seconds the TV turns off.
          So far I haven't found what voltages should be at the output of the power supply and I haven't made any measurements.
          If anyone has any ideas, please let me know.​
          Starts
          10-19-2024
          Ends
          11-19-2024
          10-20-2024, 08:44 AM
        • Ritchie_Uk
          Sharp 32BC2K0 Service Manual of Fix Please?
          by Ritchie_Uk
          Hi Folks

          I am searching for a Sharp 32BC2K0 Service Manual
          Sharp 32BC2K0 << Could be an "O" as in Orange or a Zero

          Fault - Coloured "Bars" very thin all across the screen.
          I would like tho get the values for the 2 Resistors and I believe a Missing Capacitor.

          I would Like a Service Manual, that has the component values, and locations, as the PCB isnt that clear as for designations
          Is there such thing as a Boardview for this TV?

          I will Post the Photos in a second

          Thanks
          Stay Safe !...
          09-05-2024, 06:35 AM
        • Loading...
        • No more items.
        Working...