Sharp 32BC2K0 Service Manual of Fix Please?

[Ritchie_Uk]

Hi Folks

I am searching for a Sharp 32BC2K0 Service Manual
Sharp 32BC2K0 << Could be an "O" as in Orange or a Zero

Fault - Coloured "Bars" very thin all across the screen.
I would like tho get the values for the 2 Resistors and I believe a Missing Capacitor.

I would Like a Service Manual, that has the component values, and locations, as the PCB isnt that clear as for designations
Is there such thing as a Boardview for this TV?

I will Post the Photos in a second

Thanks
Stay Safe !!

[Ritchie_Uk]

Thanks

[lotas]

R - 2x47 Ohm

[Ritchie_Uk]

Hey Iotas

Thanks for that.
How did you know the value?

Did you know the Component next to it Value / Type?
Do you have a schematic, please?

Thanks for your help already

[lotas]

This photo is from the Internet, the marking 470 is visible in the photo, and this is 47 Ohm, there is a diagram, but the component values are not indicated on it.

[Ritchie_Uk]

lotas Thankyou

Its the other component value I am not sure of it looks like CB117, which implies its a Cap

[lotas]

Yes there should be a ceramic capacitor

[Ritchie_Uk]

Yes, I added one, not knowing what the value should be, and it burnt out the 47 Ohm resistor

[Diah]

Fault - Coloured "Bars" very thin all across the screen.

with screen resolution 1366 x 768 when displaying only color bars they changed positions regards to image source... there are cleaning wet damage on the panel buffer boards

[lotas]

Yes, I added one, not knowing what the value should be, and it burnt out the 47 Ohm resistor

There the capacitor should be of small capacity, somewhere around 0.01uF

[Ritchie_Uk]

Thankyou

Let me try in the morning
will update you

[Ritchie_Uk]

with screen resolution 1366 x 768 when displaying only color bars they changed positions regards to image source... there are cleaning wet damage on the panel buffer boards

Hi Iotas

I was going to order a mainboard, but would rather repair the board.
I havnt even looked at the front panel yet, as the burning smell came from the mainboard, which ended up being the burnt resistor, and missing component.

Its a nice TV

Thankyou

[Ritchie_Uk]

Hey lotas

Thanks for your suggestions earlier

As Promised, sorry for the delay, the update is that those components have worked, and we have a screen that lights up now
I had to order some components

We have no audio, but it could be that it isnt tuned, so I am going to use a computer, to connect the HDMI port

Sadly the Flexi Cable on the T-Con board was torn off, which I didnt notice at first.
It wasnt much, just slightly, so when I rubbed my finger over it, the screen flickered.

Will try it now

[Ritchie_Uk]

ps - Has the screen Flexi Cable ever been successfully stuck back on?

[lotas]

Is it torn from the glass or from the buffer strip? Can I look at the photo?

[Ritchie_Uk]

Hi Lotas - The FlexiCable has pulled away from the main board


Is it torn from the glass or from the buffer strip? Can I look at the photo?
Torn away from the Buffer Strip
Not torn or Damaged

When I rub my finger over the Cable, picture tries to come back

I have reassembled the TV as It's taking up too much space in bits

Thanks